Acra 1279 VS Bandsaw Blade

The supplied product specification lists a blade length of 96.5 inches.

The supplied listing specifies a 1-inch blade width. Confirm that this width is supported by the machine.

The supplied information conflicts: the product listing says Wood, while the accompanying reference describes a vertical metal-cutting contour bandsaw. Confirm the machine type using the manufacturer's documentation.

Only if the machine is designed to accept that width. The reference information provided lists a narrower blade-width range, so verify the maximum permitted width before purchase.

Check the machine manual, manufacturer's parts information, or the dimensions printed on the existing blade. Do not rely on the model name alone when the specifications conflict.

Blade width affects the machine's compatibility and the type of cutting it can perform. The permitted width depends on the blade guides, wheel design, and machine specifications.

TPI means teeth per inch. It describes the number of teeth along one inch of the blade and helps determine how the blade cuts different material thicknesses.

Choose a tooth pitch appropriate for the material and its thickness. Follow the blade manufacturer's recommendations for the confirmed application.

That depends on the machine, blade width, and cutting setup. Confirm that the specified 1-inch blade width is suitable for the intended curve radius and machine.

Yes. Incorrect tension can cause tracking problems, vibration, inaccurate cuts, or premature blade wear. Follow the machine manufacturer's tension instructions.

Yes. Blade thickness is another important fitment dimension, but it was not supplied for this listing. Confirm the required thickness before purchase.

Not every bandsaw blade can cut both materials. The blade construction, tooth geometry, operating speed, and machine design must all be appropriate for the intended material.

Use the correct blade for the material, maintain proper tension and tracking, follow recommended operating speeds, and avoid excessive feed pressure.

These are the dimensions provided for this product listing. Because the accompanying model information describes a different blade-width range, confirm both dimensions against the machine manual before publishing the product as a verified fit.