BE Jarvis 16 Bandsaw Blade 102" x 1/2" Replacement

MAIN FEATURES

102-Inch Blade Length

The supplied product specification lists a 102-inch blade length. Confirm the required loop length against your machine's existing blade or manufacturer documentation before purchasing.

1/2-Inch Blade Width

The specified 1/2-inch blade width provides the listed product dimension. Verify that the machine's blade guides and wheel arrangement accommodate this width.

Metal-Cutting Application

The supplied listing classifies this product for metal cutting. The blade material, tooth geometry, and tooth pitch must be selected according to the metal type and cutting requirements.

Replacement Blade Configuration

Designed as a replacement blade listing for compatible equipment. Confirm the machine model and blade dimensions before installation.

Tooth Pitch Selection

Tooth pitch determines how the blade engages with the workpiece. Select the appropriate TPI according to material thickness and cutting requirements.

Material Compatibility

Metal-cutting blade selection depends on the workpiece. Steel, stainless steel, aluminum, and other metals require suitable tooth configurations and blade materials.

Accurate Blade Tracking

Correct blade dimensions, tension, and guide alignment are essential for stable tracking and consistent cutting performance on compatible bandsaw machines.

Proper Blade Tension

Following the machine manufacturer's tension recommendations helps maintain blade stability, reduce unwanted movement, and support accurate cutting.

Durability and Wear Resistance

A blade manufactured from an appropriate material and used under recommended operating conditions can provide reliable cutting performance and resistance to premature wear.

Suitable for Workshop Applications

If confirmed as a compatible bandsaw blade, the listed configuration may be considered for suitable workshop and metalworking applications.

Compatibility Verification

The BE Jarvis name is associated with historical meat-processing equipment. Confirm whether the intended product is a conventional bandsaw blade or a reciprocating blade before ordering.

Professional Replacement Consideration

Matching the blade's length, width, thickness, tooth pitch, and machine type is important for safe installation and dependable operation.

COMMON QUESTIONS

The supplied product specification lists a blade length of 102 inches. Verify this measurement against the machine before ordering.

The specified blade width is 1/2 inch.

The supplied listing identifies the model as BE Jarvis 16, but the available references do not confirm a 102-inch bandsaw blade for this model. Machine compatibility needs verification.

The supplied product data classifies it as a metal-cutting blade. Confirm the blade material and tooth configuration before using it on a particular metal.

The appropriate material depends on the blade construction and tooth pitch. A suitable metal-cutting blade may be selected for compatible ferrous or non-ferrous metals.

The supplied specifications do not confirm the blade material. Check the manufacturer's product information before describing it as bi-metal.

Choose the tooth pitch according to the material type and thickness. Coarser pitches generally suit thicker stock, while finer pitches are more appropriate for thinner materials.

Only use a blade specifically designed for stainless steel, with a compatible tooth configuration and machine setup.

A suitable metal-cutting blade can cut aluminum when its tooth geometry and cutting speed are appropriate for the material.

The correct length ensures that the blade can be installed, tensioned, and tracked according to the machine's design.

Blade width affects rigidity, tracking, and cutting capability. The width must be compatible with the machine's guides and blade supports.

Use the correct tooth pitch, maintain proper tension and tracking, follow recommended cutting speeds, and avoid excessive feed pressure.

The supplied listing identifies a metal-cutting application, but industrial suitability should be confirmed through the actual blade construction and machine specifications.

Yes. Available references identify 16-inch Jarvis/Wellsaw blades for reciprocating meat-cutting equipment, including several Wellsaw models. These are different from conventional continuous-loop bandsaw blades.

Confirm the exact machine model, blade type, loop length, width, thickness, tooth pitch, and material. In particular, verify whether you need a 102-inch continuous-loop bandsaw blade or a 16-inch reciprocating Jarvis/Wellsaw blade.

Blade Length inches	102"
Min/Max Blade Width	1/2" to 1/2"
Machine Type	Metal
Application	Metal Cutting (Supplied Listing)
Compatible Machine	BE Jarvis 16 (Compatibility Unverified)
Installation	Verify Machine Compatibility Before Installation

BE Jarvis 16 Bandsaw Blade