Designed for Baker CX Resaw
This replacement bandsaw blade is specified for the Baker CX, a heavy-duty horizontal band resaw designed for continuous production and precision lumber cutting. The machine can be configured with multiple heads to support different production requirements.
170-Inch Blade Length
The blade measures 170 inches (14 feet 2 inches) in length. Correct blade length is essential for proper installation, tensioning, and tracking on the compatible Baker CX resaw.
1-Inch Blade Width
This product listing specifies a 1-inch blade width, providing a suitable cutting profile for industrial lumber resawing applications. The Baker CX can also accommodate an optional 1.25-inch blade configuration when supported by the machine setup.
0.035-Inch Hardback Blade Configuration
The manufacturer's reference identifies a 0.035-inch-thick hardback blade for the 170-inch Baker CX configuration. This specification helps confirm the required blade dimensions for compatible installations.
Designed for Industrial Lumber Resawing
The Baker CX is built to process boards, cants, slabs, and other timber materials. A correctly matched replacement blade helps maintain consistent cutting performance during demanding production operations.
Thin-Kerf Cutting Performance
The Baker CX is designed for thin-kerf resawing. Using an appropriate blade and cutting setup can help reduce material removal and improve potential lumber recovery.
28-Inch CNC-Machined Band Wheels
The machine features 28-inch CNC-machined, dynamically balanced, all-steel band wheels designed to support smooth blade movement and stable operation during production cutting.
Low-Profile Flat Guide System
The Baker CX uses a Low-Profile Flat Guide System with hardened steel guide plates and guide rollers. This arrangement helps support blade alignment and consistent cutting stability.
Mechanical Spring Blade Tensioning
The standard machine configuration uses mechanical spring-loaded blade tensioning. Optional air tensioning may be available depending on the machine configuration.
12-Inch Rough-Top Conveyor
The machine features a 12-inch-wide rough-top conveyor designed to move lumber through the cutting area. Its feedworks system helps maintain material positioning during the cutting process.
Three-Sided Continuous Feedworks
The Baker CX features a three-sided feedworks arrangement with rough-top belting and powered side-feed rollers. This system helps hold and guide material throughout the cut.
Optional Four-Sided Feed System
Depending on the selected configuration, the machine can be upgraded with a four-sided feed system and optional powered or non-powered hold-downs to provide additional material control.
Variable Hydraulic Feed Speed
The Baker CX provides variable hydraulic feed speeds from approximately 0 to 120 feet per minute (FPM). Operators can adjust the feed rate according to the material type, cutting width, and production requirements.
12-Inch by 12-Inch Material Capacity
The machine is specified to handle material up to 12 inches wide by 12 inches high, making it suitable for substantial lumber, cants, and timber stock.
30 HP Standard Industrial Motor
The standard electric configuration uses a 30 HP motor, with an optional 40 HP motor available. The motor provides the power required for demanding industrial resawing operations.
Multi-Head Production Capability
The Baker CX can be configured with one to nine heads on a single frame, allowing manufacturers to increase production capacity and perform multiple resawing operations.
Industrial Dust Collection Compatibility
The machine features a 6-inch by 6-inch square dust outlet with a 90-degree adapter to a 4-inch round outlet. Approximately 600 CFM of dust collection per head is recommended.
Optional Production Upgrades
Available machine options may include digital blade-height readouts, computer setworks, return conveyors, material-handling conveyors, hopper feeders, and turnarounds. These are optional machine accessories and are not included with the replacement blade unless specified separately.
