Specified 158-Inch Blade Length
This product listing specifies a 158-inch blade length. Correct blade length is essential for proper installation, tensioning, and tracking. Confirm the required blade loop length against the machine manufacturer's specifications before ordering.
Specified 1-Inch Blade Width
The supplied product dimensions specify a 1-inch blade width. Blade width affects rigidity, tracking, and cutting performance. Verify that this width is approved for the exact machine configuration.
Designed for Sawmill Applications
This blade listing is intended for wood-resawing and lumber-processing applications. It is suitable for consideration when processing boards, cants, and other compatible wood materials.
Bi-Directional Resawing System
The Baker Comer & Goer configuration places cutting heads on both conveyors, allowing lumber to be processed during forward and return travel. This arrangement helps reduce non-cutting return time and supports higher production output.
High-Capacity Material Processing
The Model D platform is designed to process material up to approximately 16 inches wide by 16 inches high. This capacity supports large cants and lumber used in commercial wood-processing operations.
Thin-Kerf Cutting Technology
The Model D platform uses thin-kerf cutting technology with a stated kerf of approximately 0.072 inch. A narrower kerf can reduce the amount of wood removed during cutting and help improve usable lumber recovery.
Low-Profile Flat Blade Guides
The compatible machine uses Baker's low-profile flat guides, steel guide plates, and a guide wheel system to support blade alignment and cutting stability.
Hydraulic Feedworks
The Model D platform features hydraulically powered feedworks with a powered hold-down system. Variable feed speeds from approximately 10 to 60 feet per minute allow operators to adjust material movement for different cutting requirements.
Heavy-Duty Steel Band Wheels
The standard machine configuration uses 36-inch-diameter CNC-machined, dynamically balanced solid-steel band wheels. Optional 28-inch wheels are also available.
Mechanical Spring Blade Tensioning
The standard Model D configuration uses spring blade tensioning. Optional air or hydraulic tensioning systems are available, depending on machine configuration.
Powerful Individual Cutting Heads
The Model D platform uses a standard 40 HP main drive motor per head, with a 50 HP upgrade available. These motor specifications relate to the machine rather than the replacement blade.
Separate Hydraulic Feedworks Motor
A separate 10 HP motor powers the hydraulic feedworks system, supporting controlled material movement through the resaw.
Integrated Dust Collection
The machine uses a 6-inch × 6-inch square dust chute with a 4-inch round adapter. Approximately 600 CFM of dust collection capacity is recommended for the stated configuration.
Optional Production Upgrades
Available options include air or hydraulic blade tensioning and return conveyors. These features can be selected to support specific production requirements.
Professional Lumber-Processing Performance
The Comer & Goer configuration is designed for grade-lumber producers, sawmills, and industrial wood-processing facilities that need efficient, repeatable cutting operations.
