CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Baker Model A Resaw Bandsaw Blade

Baker Model A Resaw Bandsaw Blade
Image not available

Model A Resaw

Roll over image to zoom in
Model A Resaw
Baker Model A Resaw Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Baker Model A Resaw

This replacement bandsaw blade is specified for the Baker Model A, an industrial horizontal band resaw featuring a distinctive A-shaped frame. The machine is designed for processing boards, cants, and reclaimed slabs in both short-run and continuous production environments.

158-Inch Blade Length

The blade measures 158 inches (13 feet 2 inches) in length. Correct blade length is essential for proper installation, tensioning, and tracking on the compatible Baker Model A resaw.

Flexible Blade Width Options

Available in 1-inch and 1.25-inch widths, this blade specification allows operators to select a suitable configuration for their resawing requirements. The correct width should match the machine's guide components and blade setup.

0.035-Inch Blade Thickness

The specified hardback blade configuration uses a 0.035-inch thickness, providing the dimensions required for compatible Baker Model A applications.

Hardback Blade Construction

Designed for use as a hardback bandsaw blade, this configuration supports industrial resawing applications. Hardback construction provides a rigid blade profile suitable for the machine's guide and tensioning system.

Precision Cutting Compatibility

A properly selected and maintained blade helps produce consistent cuts when processing lumber, cants, boards, and slabs. Correct blade setup also helps minimize unwanted blade movement during operation.

A-Shaped Frame Machine Compatibility

The Baker Model A features a distinctive A-shaped frame designed to provide a compact and stable industrial resaw platform. The specified replacement blade is intended for this machine's horizontal cutting arrangement.

Low-Profile Flat Guide System

The machine uses Baker's Low-Profile Flat Guide System, featuring steel guide plates and rear guide-wheel support. This arrangement helps maintain blade alignment and cutting stability.

28-Inch Steel Band Wheels

The Baker Model A uses 28-inch CNC-machined, dynamically balanced, solid steel band wheels. These wheels support consistent blade movement during continuous resawing operations.

Mechanical Spring Blade Tensioning

The standard machine configuration uses mechanical spring-loaded blade tensioning. Proper tension helps maintain blade tracking and supports consistent cutting performance.

Hydraulic Variable Feed Control

The Model A features hydraulic variable feed control powered by the main drive motor. Operators can adjust the feed rate according to the material and cutting requirements.

Variable Feed Speeds

The machine provides a variable feed-speed range of approximately 0–120 feet per minute (FPM). Appropriate feed settings help maintain cutting consistency across different lumber types and cutting conditions.

6-Inch Hydraulic Conveyor

The standard machine includes a 6-inch-wide hydraulically powered conveyor with rough-top belting to move material through the cutting area.

Continuous Material Feeding

The Baker Model A supports unlimited material length through continuous feeding. This makes it suitable for processing longer boards and lumber stock in production environments.

Flexible Cutting Height

The machine supports cutting heights from approximately 1/4 inch to 6 inches, allowing operators to process different lumber thicknesses within its rated capacity.

Optional Machine Configurations

Depending on the selected machine setup, available options may include powered hold-over wheels, powered hold-down wheels, infeed and outfeed turnarounds, a slide-return system, diagonal-cut attachments, air blade tensioning, and alternative engine configurations. These are machine options and are not included with the replacement blade unless specified separately.

COMMON QUESTIONS

This replacement blade is specified for the Baker Model A horizontal band resaw.

The specified blade length is 158 inches, equivalent to 13 feet 2 inches.

The Baker Model A blade configuration is available in 1-inch and 1.25-inch widths.

The specified hardback blade thickness is 0.035 inch.

Yes. The Baker Model A is an industrial horizontal band resaw designed for processing lumber, boards, cants, and slabs.

The compatible blade configuration is specified as hardback. Confirm the exact blade construction and tooth configuration before ordering.

The machine provides fully variable feed speeds from approximately 0 to 120 FPM.

The Baker Model A supports cutting heights from approximately 1/4 inch to 6 inches.

The manufacturer's current Model A reference lists material sizes of approximately 7 inches × 7 inches or 10 inches × 4 inches above the blade, with the conveyor set at zero degrees.

Yes. The Model A is designed for unlimited material length through continuous feeding.

It features Baker's Low-Profile Flat Guide System with steel guide plates and rear guide-wheel support.

The machine uses 28-inch CNC-machined, dynamically balanced, solid steel band wheels.

The standard Baker Model A configuration uses a mechanical spring-loaded blade tensioning system. Air tensioning may be available as an option.

The standard machine includes a 6-inch-wide hydraulically powered conveyor with rough-top belting.

Confirm the 158-inch blade length, selected 1-inch or 1.25-inch width, 0.035-inch thickness, hardback construction, and tooth configuration against your existing blade or machine documentation.

SPECIFICATIONS

Blade Length inches158"
Min/Max Blade Width1" to 1.25"
Machine TypeSawmill
Primary ApplicationIndustrial Lumber Resawing
Machine Feed Speed0–120 FPM
Machine Cutting Height1/4"–6"
Machine Material Capacity7" × 7" or 10" × 4"
Conveyor Width6 Inches
Conveyor TypeHydraulic Motor-Driven with Rough-Top Belt
Band Wheel Diameter28 Inches
Band Wheel ConstructionCNC-Machined Solid Steel
Blade Guide SystemLow-Profile Flat Guides with Steel Guide Plates
Rear Blade SupportRear Guide Wheel
Blade TensioningMechanical Spring-Loaded
Standard Main Motor20 HP TEFC
Dust Collection Outlet4 Inches
Recommended ApplicationSawmills, Lumber Processing, Board and Cant Resawing

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available