CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Baker Model BX Resaw Bandsaw Blade

Baker Model BX Resaw Bandsaw Blade
Image not available

Model BX Resaw

Roll over image to zoom in
Model BX Resaw
Baker Model BX Resaw Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Baker Model BX Resaw

This replacement bandsaw blade is specified for the Baker Model BX industrial horizontal band resaw, designed for high-volume lumber processing and continuous production applications.

170-Inch Blade Length

The blade measures 170 inches (14 feet 2 inches) in length, matching the blade length identified for the Baker Model BX Resaw.

1.25-Inch Blade Width

This product is specified with a 1.25-inch blade width, providing a stable cutting profile for demanding industrial resawing applications. Confirm the required width against your existing blade and machine setup before ordering.

Industrial Thin-Kerf Cutting

Designed for thin-kerf resawing applications, the compatible machine helps reduce the amount of wood removed during each cutting pass. This can minimize sawdust waste and improve usable lumber recovery.

Compatible with Baker Low-Profile Flat Guides

The Baker Model BX uses a low-profile flat guide system with hardened steel plates to support blade positioning and cutting stability.

28-Inch Solid Steel Band Wheels

The machine features 28-inch solid steel band wheels designed to support stable blade movement during continuous industrial operation.

Mechanical Spring Blade Tensioning

The standard machine uses mechanical spring tensioning, with optional air tensioning available. Correct blade tension is important for consistent tracking and cutting accuracy.

Optional Air Tensioning System

The optional air tensioning system provides an alternative blade-tensioning arrangement for supported machine configurations.

High-Speed Material Feeding

The Baker Model BX offers variable feed speeds from 20 to 120 feet per minute, allowing operators to adjust material movement according to production requirements and cutting conditions.

12-Inch Rough-Top Conveyor

The machine uses a 12-inch rough-top conveyor belt to move lumber through the cutting area while supporting consistent material feeding.

Hydraulically Powered Feed Wheels

Hydraulically powered polyolefin feed wheels and powered hold-downs help control material movement through the resaw.

Optional Four-Sided Feed System

The standard feedworks uses a three-sided continuous feed arrangement. An optional four-sided system with additional hold-down wheels provides increased material control.

High-Capacity Material Handling

The single-head configuration accommodates material up to 12 × 12 inches, making the machine suitable for processing substantial timber and lumber stock.

Efficient Dust Collection Compatibility

The machine features a 4-inch dust collection outlet, with approximately 600 CFM recommended per head, helping remove sawdust from the cutting area.

Modular Multi-Head Configuration

The Baker Model BX can be configured with a single resaw head or expanded to as many as nine heads on one frame, depending on production requirements.

Industrial Electrical Controls

The machine includes a prewired NEMA 12 electrical enclosure with starters, motor overload protection, and pedestal-mounted remote start/stop controls.

COMMON QUESTIONS

This replacement blade is specified for the Baker Model BX industrial horizontal band resaw.

The specified blade length is 170 inches, equivalent to 14 feet 2 inches.

This product listing specifies a 1.25-inch blade width.

Yes. The Baker Model BX is an industrial band resaw designed for processing timber and lumber.

The single-head configuration accommodates material measuring up to 12 × 12 inches.

The Baker Model BX offers variable feed speeds from approximately 20 to 120 feet per minute.

The standard configuration uses a 30 HP TEFC motor, with an optional 40 HP upgrade.

The machine features Baker Low-Profile Flat Guides with hardened steel plates to support blade positioning and stability.

The standard configuration uses mechanical spring tensioning. Optional air tensioning is also available.

The Baker Model BX uses 28-inch solid steel band wheels.

Yes. It is designed for thin-kerf resawing, which can reduce sawdust waste and improve usable lumber recovery.

The machine uses a 12-inch rough-top conveyor, hydraulically powered polyolefin feed wheels, and powered hold-downs to move material through the cutting area.

Yes. It is available in configurations ranging from a single head to as many as nine heads on one frame.

Approximately 600 CFM per head is recommended for the machine's dust collection system.

Confirm the 170-inch blade length and 1.25-inch blade width against your existing blade or machine documentation. Also verify blade thickness, tooth pitch, tooth configuration, and construction before ordering.

SPECIFICATIONS

Blade Length inches170"
Min/Max Blade Width1.25" to 1.25"
Machine TypeSawmill
Cutting TechnologyThin-Kerf Resawing
Machine Material CapacityUp to 12" × 12"
Conveyor Width12 Inches
Band Wheel Diameter28 Inches
Feed Speed20–120 FPM
Blade TensioningMechanical Spring / Optional Air
Blade Guide SystemBaker Low-Profile Flat Guides
Feedworks SystemThree-Sided Continuous Feedworks
Optional Feed SystemFour-Sided Feedworks
Feed WheelsHydraulically Powered Polyolefin
Standard Main Motor30 HP TEFC
Optional Main Motor40 HP
Electrical EnclosurePrewired NEMA 12
Dust Collection Outlet4 Inches
Recommended Dust CollectionApprox. 600 CFM per Head
Single-Head DimensionsApprox. 180" L × 85" W × 68" H
Additional Head LengthApprox. 55 Inches
Single-Head Machine WeightApprox. 3,800 lbs
Additional Head WeightApprox. 1,800 lbs per Head
Maximum Head ConfigurationUp to 9 Heads
Primary ApplicationIndustrial Lumber Processing

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available