Designed for Baker Model C Resaw
This replacement bandsaw blade is specified for the Baker Model C horizontal band resaw, an industrial machine developed for high-recovery lumber processing and continuous production applications.
158-Inch Blade Length
The blade measures 158 inches (13 feet 2 inches) in length, matching the standard blade length identified in the manufacturer's Model C technical documentation.
1-Inch to 1.25-Inch Blade Width Compatibility
The supplied product listing supports blade widths from 1 inch to 1.25 inches. The manufacturer's specifications also identify a 1.5-inch optional blade configuration. Confirm the required width for your particular machine setup before ordering.
Thin-Kerf Cutting Technology
The Baker Model C uses thin-kerf hardback bandsaw blades to minimize material removal during cutting. This helps reduce sawdust waste and maximize usable lumber recovery from valuable timber.
Hardback Blade Construction
The manufacturer's documentation identifies hardback blade configurations with different width and thickness options. This construction is designed for demanding industrial resawing applications.
Baker Low-Profile Flat Guide System
The machine features a low-profile flat guide system with hardened steel guide plates to support blade positioning and maintain cutting stability.
28-Inch Solid Steel Band Wheels
The Baker Model C uses 28-inch CNC-machined, dynamically balanced solid steel band wheels designed for stable blade movement during continuous production.
Three-Sided Continuous Feedworks
The feedworks system incorporates rough-top conveyor belting, powered side feed rollers, and idler or hold-over rolls to support consistent material movement through the cutting area.
Optional Four-Sided Feed System
The machine can be upgraded with optional hold-down wheels to provide additional material control during demanding resawing operations.
Mechanical Spring Blade Tensioning
The standard configuration uses mechanical spring tensioning, with optional air blade tensioning available. Correct blade tension helps maintain tracking and cutting accuracy.
40:1 Manual Blade Height Adjustment
The Baker Model C features a 40:1 manual raise-and-lower mechanism for accurate blade height adjustment. Its standard cutting thickness range is approximately 0 to 9 inches.
Variable-Speed Material Feeding
The machine provides fully variable feed speeds from 20 to 120 feet per minute, allowing operators to adjust material movement according to timber type and production requirements.
Efficient Dust Collection Compatibility
The machine features a 6 × 6-inch square dust outlet with a rotatable adapter that converts to a 4-inch round connection. The recommended dust collection capacity is approximately 600 CFM per head.
Modular Multi-Head Configuration
The Baker Model C can be configured with a single resaw head or expanded to support up to nine heads on one frame, depending on production requirements.
Industrial Electrical Controls
The machine features a prewired NEMA electrical enclosure with starters, motor overload protection, and pedestal-mounted remote start/stop controls for convenient operation.
This replacement blade is specified for the Baker Model C horizontal band resaw.
The specified blade length is 158 inches, equivalent to 13 feet 2 inches.
The supplied listing specifies blade widths from 1 inch to 1.25 inches.
Yes. The manufacturer's documentation also identifies an optional 1.5-inch-wide blade configuration.
Yes. It is an industrial horizontal band resaw designed for processing timber into boards and other lumber products.
The single-head base model supports material measuring up to 6 × 12 inches.
The manufacturer's documentation identifies a standard 158-inch × 1-inch × 0.035-inch hardback blade.
Optional configurations include a 158-inch × 1.25-inch × 0.035-inch blade and a 158-inch × 1.5-inch × 0.042-inch blade.
Thin-kerf technology uses a narrow cutting profile to remove less wood during each pass, helping reduce sawdust and improve usable lumber recovery.
The machine features 28-inch CNC-machined solid steel band wheels.
The machine provides fully variable feed speeds from approximately 20 to 120 feet per minute.
The standard machine uses mechanical spring blade tensioning. Optional air tensioning is also available.
The standard configuration uses a 20 HP TEFC motor, with an optional 30 HP motor.
Yes. The modular frame supports configurations of up to nine resaw heads, depending on the production setup.
Confirm the 158-inch blade length and required blade width against your existing blade or machine documentation. Also verify blade thickness, tooth pitch, and hardback construction before ordering.
| Blade Length inches | 158" |
| Min/Max Blade Width | 1" to 1.25" |
| Machine Type | Sawmill |
| Cutting Technology | Thin Kerf |
| Machine Material Capacity | 6" × 12" |
| Conveyor Width | 6 Inches |
| Band Wheel Diameter | 28 Inches |
| Feed Speed | 20–120 FPM |
| Cutting Thickness Adjustment | 0–9 Inches |
| Height Adjustment System | 40:1 Manual Adjustment |
| Blade Tensioning | Mechanical Spring / Optional Air |
| Blade Guide System | Low-Profile Flat Guides with Hardened Steel Plates |
| Feedworks System | Three-Sided Continuous Feedworks |
| Optional Feed System | Four-Sided Feedworks |
| Standard Main Motor | 20 HP TEFC |
| Optional Main Motor | 30 HP |
| Electrical System | 3-Phase |
| Dust Collection Outlet | 6" × 6" with Rotatable 4" Adapter |
| Recommended Dust Collection | Approx. 600 CFM per Head |
| Single-Head Dimensions | Approx. 180" L × 77"–85" W × 68" H |
| Conveyor Working Height | 34 Inches |
| Single-Head Machine Weight | Approx. 3,500 lbs |
| Additional Head Weight | Approx. 2,000 lbs per Head |
| Maximum Head Configuration | Up to 9 Heads |
| Primary Application | Industrial Lumber Processing |
global ratings
Share your thoughts with other customers