CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Bama-Eisele HB 180 N Bandsaw Blade

Bama-Eisele HB 180 N Bandsaw Blade
Image not available

HB-180-N

Roll over image to zoom in
HB-180-N
Bama-Eisele HB 180 N Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Bama-Eisele HB 180 N

Specified for the Bama-Eisele HB 180 N horizontal metal-cutting bandsaw, a vintage machine associated with German industrial saw production.

121-Inch Blade Length

The supplied product specification lists a 121-inch blade length. Correct blade length is essential for installation, tensioning, and accurate tracking.

3/4-Inch Blade Width

The 0.75-inch blade width is the specified width for this product listing. Always confirm the width required by the installed blade guides before ordering.

Bi-Metal Blade Compatibility

A bi-metal replacement blade is a suitable option for metal-cutting applications. M42 high-speed steel teeth combined with a flexible backing provide a balance of cutting performance and fatigue resistance.

Designed for Horizontal Metal Cutting

The blade is intended for horizontal bandsaw applications involving suitable metal stock, including solid bars, tubing, pipes, and structural profiles.

Suitable for Ferrous and Non-Ferrous Metals

With the correct tooth pitch and blade material, compatible applications can include carbon steel, stainless steel, aluminum, brass, and other metals.

Supports Straight Cutting

A properly selected blade helps maintain a consistent cutting path when processing bars, tubes, pipes, and other workpieces within the machine's capacity.

Suitable for Miter Cutting

The pivot-style horizontal saw design supports basic angled cutting applications. Correct blade setup helps maintain consistent performance during straight and miter cuts.

Gravity or Hydraulic Feed Compatibility

The machine's pivot-style cutting arrangement uses controlled descent to bring the blade through the workpiece. Feed behavior depends on the specific machine configuration.

Coolant-Assisted Cutting

The machine specification describes an integrated coolant pump and recirculating system. Appropriate coolant helps control heat and remove chips during metal cutting.

Precision Blade Tracking

Correct blade dimensions, tension, and guide alignment are important for stable tracking and consistent cutting accuracy.

Reduced Cutting Vibration

A properly tensioned blade operating with correctly adjusted guides helps minimize unwanted movement and supports smoother cutting.

Multiple Tooth Pitch Options

Different tooth pitches can be selected according to material thickness and cross-section. Coarser pitches are generally suited to thicker stock, while finer pitches are better for thinner materials.

Durable Replacement Construction

A suitable bi-metal blade combines a flexible backing with hardened cutting teeth to support repeated cutting operations and resist premature tooth wear.

Suitable for Workshop and Maintenance Use

The replacement blade is intended for metalworking workshops, fabrication facilities, engineering departments, and maintenance applications using compatible Bama-Eisele equipment.

COMMON QUESTIONS

It is specified for the Bama-Eisele HB 180 N horizontal metal-cutting bandsaw.

The supplied product specification lists a blade length of 121 inches.

The specified blade width is 3/4 inch (0.75 inch).

Yes. It is intended for compatible horizontal metal-cutting applications.

With the appropriate blade construction and tooth pitch, it can cut carbon steel, stainless steel, aluminum, brass, copper, tubing, and other compatible metals.

Bi-metal construction is suitable for many metal-cutting applications. Confirm the blade material and tooth configuration required for your machine and workpiece.

The supplied technical reference gives a thickness of approximately 0.9 mm (0.035 inch) for the Eisele HB 180 blade listing. Confirm this dimension for the exact HB 180 N version before ordering.

Choose the tooth pitch according to the material thickness and cross-section. Coarser pitches generally suit thicker stock, while finer pitches are better for thinner materials.

Yes, a suitable bi-metal blade with the correct tooth pitch and cutting settings can be used for stainless steel.

Yes. Select a suitable tooth configuration and cutting speed for aluminum, brass, and other non-ferrous metals.

The supplied machine description identifies an integrated coolant pump and recirculating coolant system.

The supplied description identifies a pivot-style horizontal saw with adjustable miter capability for angled cuts.

Correct tension helps maintain blade tracking, cutting stability, and accuracy while reducing the risk of premature blade wear.

Use the correct tooth pitch, maintain proper tension and guide alignment, select an appropriate cutting speed and feed rate, and use coolant as recommended.

Confirm the exact machine model and suffix, blade length, blade width, thickness, tooth pitch, and guide requirements. This is particularly important because some Eisele HB 180 references list a 1-inch blade, while the HB-180-N chart entry lists a 3/4-inch blade.

SPECIFICATIONS

Blade Length inches121"
Min/Max Blade Width3/4" to 3/4"
Machine TypeMetal
Blade ThicknessApproximately 0.035 Inch (reference; verify)
Blade MaterialBi-Metal M42 HSS (recommended option; confirm selection)
Tooth PitchSelect according to material and thickness
Blade ConstructionWelded Endless Loop
Primary ApplicationHorizontal Metal Cutting

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available