CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Bama Eisele HB 280 N Bandsaw Blade

Bama Eisele HB 280 N Bandsaw Blade
Image not available

HB-280-N

Roll over image to zoom in
HB-280-N
Bama Eisele HB 280 N Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Bama Eisele HB 280 N

Specified for the Bama Eisele HB 280 N horizontal metal-cutting bandsaw, a machine class associated with industrial cutting of solid stock, tubing, and structural profiles.

158.25-Inch Blade Length

The supplied product specification lists a 158.25-inch blade length. Correct blade length is essential for proper installation, tensioning, and tracking.

1-Inch Blade Width

The supplied listing specifies a 1-inch blade width. Confirm that this width is compatible with the machine's blade guides and wheel configuration before ordering.

Suitable for Horizontal Metal Cutting

Designed for compatible horizontal bandsaw applications involving metal bars, tubes, pipes, and structural sections.

Bi-Metal Blade Option

A bi-metal blade with high-speed steel cutting teeth is a suitable option for many industrial metal-cutting applications. Select the blade construction according to the material being processed and the machine's requirements.

Precision Cutting Performance

A correctly selected tooth pitch and properly adjusted blade can help produce consistent cuts while reducing blade wandering and unnecessary material waste.

Hydraulic Downfeed Compatibility

The referenced HB 280-class machine configuration uses hydraulic downfeed control to regulate saw-frame descent and maintain controlled cutting pressure.

Miter-Cutting Capability

The referenced machine class supports angled cutting through a swiveling vise or saw-frame arrangement, with miter capability typically reaching approximately 45 degrees.

Adjustable Blade Guides

Adjustable carbide and roller guide systems help support the blade and maintain alignment during cutting. Correct guide positioning is important for cutting accuracy and blade stability.

Integrated Coolant System

The referenced machine configuration includes a coolant tank, pump, and delivery nozzles near the blade guides. Coolant helps control heat and flush chips from the cutting area.

Automatic End-of-Cut Shutoff

The referenced machine class may use a limit switch to stop the blade drive and coolant pump when a cutting cycle is completed.

Blade Tension Monitoring

A blade-tension indicator helps operators check tension during setup. Correct tension supports stable tracking and consistent cutting performance.

Safety Shutoff Features

Depending on the machine version, safety features may include blade-break detection and protective-cover interlocks that stop operation under specified conditions.

Multiple Cutting-Speed Options

The referenced HB 280-class machines offer multi-step or variable blade-speed settings. Choosing an appropriate speed helps match cutting conditions to the metal type and workpiece thickness.

Built for Industrial Workshops

A properly matched replacement blade supports metalworking applications in fabrication shops, engineering facilities, machine shops, and industrial maintenance environments.

Important Blade Compatibility Note

The supplied product listing specifies a 158.25-inch × 1-inch blade. However, the provided HB 280-class technical reference lists blade dimensions of 3,400 × 27 × 0.9 mm or 3,505 × 27 × 0.9 mm, depending on the machine version.

These dimensions are different:

  • Supplied listing: 158.25 inches × 1 inch

  • Reference blade option 1: approximately 133.86 inches × 1.063 inches

  • Reference blade option 2: approximately 138 inches × 1.063 inches

The reference dimensions should not be treated as confirmed HB 280 N specifications without checking the exact machine documentation. Verify the model suffix, blade length, width, thickness, and guide requirements before ordering.

COMMON QUESTIONS

This product listing specifies compatibility with the Bama Eisele HB 280 N horizontal metal-cutting bandsaw. Confirm the exact machine version before ordering.

The supplied product specification lists a blade length of 158.25 inches.

The supplied listing specifies a 1-inch blade width.

Yes. It is intended for compatible horizontal metal-cutting applications involving bars, tubes, pipes, and structural profiles.

With the appropriate blade material and tooth pitch, it can be used for carbon steel, stainless steel, aluminum, and other compatible metals.

Bi-metal construction is a suitable option for many metal-cutting applications. Confirm the required blade construction and dimensions for your exact machine.

The supplied HB 280-class reference lists a thickness of approximately 0.9 mm (0.035 inch). Verify the required thickness for the specific machine before purchasing.

Choose the tooth pitch according to the material type, workpiece thickness, and cross-section. Coarser pitches generally suit thicker stock, while finer pitches are more suitable for thinner materials.

Yes, a suitable bi-metal blade with the correct tooth pitch and cutting settings can be used for stainless steel.

Yes. Select a tooth configuration and cutting speed appropriate for aluminum, brass, copper, and other non-ferrous metals.

The supplied HB 280-class reference describes hydraulic downfeed control for regulating the saw-frame descent.

The referenced machine class supports angled cutting, typically up to approximately 45 degrees, depending on the specific configuration.

The supplied reference describes an integrated coolant system with a pump and delivery nozzles to help control cutting heat and remove chips.

Use the correct tooth pitch, maintain proper blade tension and guide alignment, select suitable cutting speeds and feed pressure, and use coolant as recommended.

Confirm the exact machine model and suffix, blade length, blade width, blade thickness, tooth pitch, and guide requirements. This is especially important because the supplied 158.25-inch × 1-inch listing differs from the blade dimensions in the provided HB 280-class reference.

SPECIFICATIONS

Blade Length inches158.25"
Min/Max Blade Width1" to 1"
Machine TypeMetal
Recommended Blade OptionBi-Metal M42 HSS, subject to machine compatibility
Tooth PitchSelect according to material and thickness
Blade ConstructionWelded Endless Loop
Primary ApplicationHorizontal Metal Cutting

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available