Designed for Bama Eisele HB 450 S
Specified for the Bama Eisele HB 450 S semi-automatic horizontal metal-cutting bandsaw. Confirm the machine's exact model designation and blade requirements before ordering, particularly for legacy equipment.
221.25-Inch Blade Length
The 221.25-inch blade length corresponds closely to the published 5,620 mm metric specification. Correct blade length is essential for proper installation, tensioning, and tracking.
1.25-Inch Blade Width
The 1.25-inch blade width is approximately 31.75 mm, closely matching the 32 mm blade width listed in the available Eisele HB 450 machine reference.
Heavy-Duty Metal Cutting
Designed for compatible metal-cutting applications involving solid bars, tubes, pipes, and structural steel profiles. Choose the blade material and tooth configuration according to the workpiece.
Semi-Automatic Machine Compatibility
The compatible HB 450 S machine uses a semi-automatic operating cycle. Its hydraulic functions support workpiece clamping, controlled saw-frame downfeed, and frame return after cutting.
Variable-Speed Compatibility
The referenced HB 450 machine provides an infinitely variable blade-speed range of approximately 12–120 m/min. Selecting a suitable speed for the material and tooth configuration helps maintain cutting efficiency.
Suitable for Structural Profiles
The compatible machine is designed to process different workpiece shapes, including solid stock, tubing, and structural profiles such as I-beams, H-beams, and U-channels.
Supports Large Workpiece Cutting
The referenced HB 450 machine has a stated round or square cutting capacity of approximately 450 mm at 90° and a maximum flat-material capacity of 630 × 300 mm.
Stable Cutting Performance
Correct blade tension, guide alignment, and machine setup help maintain a stable cutting path and reduce unwanted blade movement during operation.
Tooth Pitch Selection for Different Materials
Different materials and thicknesses require suitable tooth pitches. Coarser pitches are generally used for thicker solid stock, while finer or variable pitches can be appropriate for thinner sections and tubing.
Bi-Metal Blade Option
M42 bi-metal blades are commonly selected for demanding metal-cutting applications, including stainless and alloy steels. Confirm the blade construction and tooth specification when selecting the replacement.
Efficient Chip Removal
Choosing the correct tooth geometry and pitch helps clear chips from the cutting area, reducing tooth loading and supporting consistent cutting performance.
Reduced Premature Wear
Appropriate cutting speed, feed pressure, blade tension, and tooth selection can help reduce excessive tooth stress and premature blade wear.
Suitable for Industrial Workshops
The blade specification is intended for professional metalworking environments such as fabrication shops, machine shops, steel-processing facilities, and industrial maintenance departments.
Dimensional Compatibility for Legacy Equipment
The published Eisele HB 450 reference lists a 5,620 mm blade length and 32 mm width. These dimensions closely correspond to the supplied 221.25-inch and 1.25-inch product specifications. Verify the required blade thickness and exact fit against the machine manual or existing blade before purchase.
It is specified for the Bama Eisele HB 450 S semi-automatic horizontal metal-cutting bandsaw.
The specified blade length is 221.25 inches, approximately 5,620 mm.
The specified blade width is 1.25 inches, approximately 31.75 mm.
The published machine reference lists a 32 mm blade width. The supplied 1.25-inch width is approximately 31.75 mm, which is a close dimensional match.
The available machine reference lists 5,620 × 32 × 1.1 mm. Confirm the required dimensions for the exact HB 450 S variant before ordering.
Yes. It is specified for a horizontal metal-cutting bandsaw used for solid bars, tubing, pipes, and structural metal profiles.
With the appropriate blade construction and tooth pitch, it can be selected for compatible carbon steel, tool steel, stainless steel, aluminum, and structural metal profiles.
The published Eisele HB 450 reference lists an infinitely variable blade-speed range of approximately 12–120 m/min.
The available reference lists approximately 450 mm round or square capacity and 630 × 300 mm maximum flat-material capacity at 90°.
Yes. The supplied machine description identifies the HB 450 S as a semi-automatic machine with hydraulic clamping, saw-frame downfeed, and automatic frame return.
Yes. With a suitable tooth configuration, it can be used for compatible structural profiles, including I-beams, H-beams, and U-channels within the machine's capacity.
Yes. M42 bi-metal blades are commonly used for stainless steel and other demanding metal-cutting applications. Select the tooth pitch according to the material thickness.
Proper tension helps maintain stable blade tracking and cutting accuracy. Incorrect tension can contribute to blade wandering, vibration, and premature wear.
Use the appropriate tooth pitch and cutting speed, maintain correct blade tension and tracking, avoid excessive feed pressure, and follow the machine manufacturer's coolant and maintenance recommendations.
Confirm the machine model, blade length, blade width, blade thickness, and tooth configuration. The supplied dimensions closely match the published HB 450 reference, but the exact HB 450 S machine requirements should be checked before purchase.
| Blade Length inches | 221.25" |
| Min/Max Blade Width | 1.25" to 1.25" |
| Machine Type | Metal |
| Compatible Machine Reference | Eisele HB 450 |
| Machine Type | Semi-Automatic Horizontal Metal Bandsaw |
| Round Cutting Capacity at 90° | 450 mm |
| Square Cutting Capacity at 90° | 450 mm |
| Maximum Flat Cutting Capacity at 90° | 630 × 300 mm |
| Published Reference Blade Length | 5,620 mm |
| Published Reference Blade Width | 32 mm |
| Published Reference Blade Thickness | 1.1 mm |
| Blade Speed | 12–120 m/min |
| Speed Adjustment | Infinitely Variable |
| Workpiece Clamping | Hydraulic |
| Primary Application | Solid Bars, Tubes, Pipes & Structural Profiles |
global ratings
Share your thoughts with other customers