CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Barson Rollox Type A Bandsaw Blade

Barson Rollox Type A Bandsaw Blade
Image not available

Type A

Roll over image to zoom in
Type A
Barson Rollox Type A Bandsaw Blade
View Spec

MAIN FEATURES

97.25-Inch Blade Length

The supplied replacement blade specification features a 97.25-inch overall length. Correct blade length is essential for proper installation, tensioning, and tracking. Verify this measurement against the existing blade and machine requirements before purchase.

5/8-Inch Blade Width

The 0.625-inch blade width, equivalent to approximately 15.875 mm, is close to the 16 mm blade width referenced for certain Barson-Rollox Type A configurations.

Designed for Metal Cutting

This blade specification is intended for compatible metal-cutting applications involving solid bars, pipes, tubes, and structural profiles. Select the appropriate blade material and tooth pitch according to the workpiece.

Compatible with Horizontal Bandsaw Applications

The Barson-Rollox Type A is a classic horizontal metal-cutting bandsaw. A correctly matched replacement blade helps maintain consistent tracking and cutting performance.

Suitable for Convertible Vertical Operation

Some Type A machine configurations can be converted for vertical cutting by positioning the saw bow upright and using an appropriate worktable attachment. Blade compatibility should be checked for the selected operating configuration.

Rocking-Cut Mechanism Compatibility

The Rollox mechanism uses a rocking or oscillating cutting action. Correct blade dimensions and setup help the machine maintain its intended cutting movement.

Heavy-Duty Machine Compatibility

The original Barson-Rollox Type A features a rigid cast-iron structure designed to provide stability during metal cutting. Proper blade selection supports consistent operation on compatible machines.

Supports Miter-Cutting Applications

The Type A machine reference describes a swivel vise that typically supports miter cuts up to 45 degrees. A correctly selected blade can be used for suitable straight and angled cutting applications.

Multiple Tooth Pitch Options

Tooth pitch should be selected according to the material type and thickness. Coarser pitches generally suit thicker solid stock, while finer pitches are better suited to thinner tubing and profiles.

Suitable for Ferrous and Non-Ferrous Metals

With the appropriate blade material and tooth configuration, this blade specification can be selected for compatible steel, alloy steel, aluminum, and other workshop metals.

Stable Blade Tracking

Proper blade tension, guide alignment, wheel condition, and machine setup help maintain accurate blade tracking and reduce unwanted blade movement.

Efficient Chip Removal

Choosing an appropriate tooth geometry and pitch helps remove chips from the cutting area, reducing tooth loading and supporting consistent cutting performance.

Reduced Premature Blade Wear

Correct cutting speed, feed pressure, tooth selection, and blade tension can help reduce unnecessary stress on the blade and extend its service life.

Suitable for Workshop and Industrial Use

The Barson-Rollox Type A platform is associated with metalworking workshops and industrial cutting applications. A correctly matched blade can support routine fabrication and maintenance work.

Compatibility Check for Legacy Machines

The supplied product length is 97.25 inches, while the typical Type A machine reference lists approximately 2,080–2,110 mm. Although the supplied 5/8-inch width is close to the referenced 16 mm width, the length difference must be resolved before claiming compatibility.

COMMON QUESTIONS

It is listed for the Barson Rollox Type A metal-cutting bandsaw. Verify the exact machine variant and blade dimensions before ordering.

The supplied product specification lists a blade length of 97.25 inches.

The specified blade width is 5/8 inch (0.625 inch).

The supplied 5/8-inch width is approximately 15.875 mm, which is close to the 16 mm width referenced for some Type A configurations.

No. The typical legacy machine reference lists approximately 2,080–2,110 mm, while 97.25 inches is approximately 2,470 mm. Confirm the exact machine variant and required blade length before purchase.

Yes. The product is specified for metal-cutting applications involving compatible bars, tubes, pipes, and structural profiles.

Depending on blade construction and tooth pitch, it can be selected for compatible carbon steel, alloy steel, stainless steel, aluminum, and other metals.

The typical machine reference describes a swivel vise with a mitering range of up to 45 degrees.

Some configurations can be converted for vertical operation using an upright saw bow and an appropriate worktable attachment.

It is a rocking or oscillating cutting mechanism that changes the blade's engagement with the workpiece during the cutting process.

The appropriate material depends on the metal being cut, cutting frequency, and machine requirements. Confirm the recommended blade construction with the machine documentation or blade supplier.

Choose the tooth pitch according to material thickness. Coarser pitches are generally used for thicker stock, while finer pitches are suitable for thinner materials.

Correct tension helps maintain stable tracking and cutting accuracy. Incorrect tension can contribute to blade wandering, vibration, and premature wear.

Use the correct tooth pitch and cutting speed, maintain proper blade tension and tracking, inspect the guide bearings, and keep the machine's drive and feed mechanisms properly maintained.

Confirm the exact machine model, blade length, blade width, blade thickness, and tooth configuration. Pay particular attention to the difference between the supplied 97.25-inch length and the typical Type A reference length of approximately 2,080–2,110 mm.

SPECIFICATIONS

Blade Length inches97.25"
Min/Max Blade Width5/8" to 5/8"
Machine TypeMetal
Historical ManufacturerWandsbeker Werkzeug-Gesellschaft Beinhoff & Co.
Machine ModelBarson-Rollox Type A
Machine TypeHorizontal / Vertical Convertible Metal Bandsaw
ConstructionHeavy-Duty Cast Iron
Typical Round Cutting CapacityApproximately 150–170 mm
Typical Flat Cutting CapacityApproximately 150 × 220 mm
Miter Cutting RangeTypically 0°–45°
Machine WeightApproximately 140–165 kg
Primary ApplicationWorkshop and Industrial Metal Cutting

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available