Designed for Bauer HS 160 A Equipment
This bandsaw blade is listed for the Bauer HS 160 A model. Its specified dimensions make it a replacement option for compatible cutting equipment. Confirm the exact machine identification and original blade measurements before installation.
118.3125-Inch Blade Length
The blade features a specified length of 118.3125 inches, making accurate length matching essential for installation, tensioning, and proper tracking. Always compare the blade length with the existing blade or the manufacturer's machine documentation.
3/4-Inch Blade Width
The 3/4-inch blade width provides a cutting profile suitable for compatible metal-cutting bandsaw applications. Correct width selection is important for proper blade-guide support, tensioning, and cutting stability.
Designed for Metal Cutting Applications
This blade is intended for compatible metal-cutting operations involving steel bars, metal tubing, pipes, and structural profiles. Choosing the right blade construction and tooth pitch for the material helps support effective cutting performance.
Suitable for Fabrication and Workshop Use
Designed for compatible metalworking applications in fabrication shops, machine shops, industrial maintenance facilities, and manufacturing environments where metal stock needs to be cut to size.
Supports Consistent Straight Cuts
A properly installed blade with suitable tooth geometry, tension, and tracking helps maintain a consistent cutting path. Correct machine setup is important for achieving straight and repeatable cuts.
Compatible with Different Metal Profiles
Depending on blade material and tooth configuration, the blade may be selected for compatible carbon steel, stainless steel, aluminum, and other metals. The correct blade selection should be based on the material and workpiece dimensions.
Tooth Pitch Selection for Material Thickness
Tooth pitch plays an important role in cutting performance. Coarser pitches are generally used for thicker solid stock, while finer or variable pitches are preferred for thinner tubing and profiles.
Supports Efficient Chip Removal
The correct tooth pitch and blade geometry help clear chips from the cutting area. Appropriate chip removal helps prevent tooth clogging and supports smoother cutting in compatible materials.
Stable Blade Tracking
Proper blade tension, guide alignment, and machine condition help maintain stable blade tracking. Correct setup reduces unwanted blade movement and helps support cutting accuracy.
Helps Reduce Premature Blade Wear
Using suitable cutting speeds, feed pressure, blade tension, and tooth pitch can help reduce excessive blade stress. Proper operating practices contribute to longer blade service life.
Suitable for Industrial Metalworking Tasks
The blade dimensions make it a replacement option for compatible metal-cutting equipment used in industrial and workshop environments. Confirm the machine's blade capacity before purchasing.
Blade Construction Selection
Blade material and construction should be selected according to the metal being cut and the operating conditions. Bi-metal blades are commonly used for general metal-cutting applications, but the correct construction depends on the specific machine and workpiece.
Replacement Blade for Compatible Bauer Equipment
This blade is listed under the Bauer HS 160 A model reference. The supplied dimensions are 118.3125 inches in length and 3/4 inch in width. Check the existing blade and machine specifications to confirm compatibility.
This blade is listed for the Bauer HS 160 A model. Verify the exact machine model and blade requirements before ordering.
The blade length is 118.3125 inches.
The blade width is 3/4 inch.
Yes, it is specified for compatible metal-cutting applications involving suitable metal stock, pipes, tubing, and profiles.
Depending on blade construction and tooth pitch, it may be suitable for compatible carbon steel, stainless steel, aluminum, and other metals.
It can be used for compatible solid steel bars when the blade tooth pitch, material construction, cutting speed, and machine capacity are appropriate.
Yes, it can be used for compatible pipe and tubing cutting applications. Select a suitable tooth pitch based on the material wall thickness.
A suitable metal-cutting blade can cut stainless steel when the blade construction, tooth pitch, cutting speed, and feed pressure are appropriate for the material.
Yes, provided the blade configuration is suitable for aluminum and the machine operates at the recommended cutting speed and feed rate.
The tooth pitch is not specified. Choose the appropriate TPI according to the thickness and type of material being cut. Thicker materials generally require coarser tooth spacing, while thinner profiles require finer spacing.
Blade width affects blade rigidity, cutting stability, and compatibility with the machine's guides. The specified 3/4-inch width must match the machine's blade-guide and tensioning system.
Correct blade tension helps maintain tracking and cutting stability. Incorrect tension may cause blade wandering, vibration, uneven cuts, or premature blade failure.
Use the appropriate tooth pitch and cutting speed, maintain proper blade tension, ensure the blade guides are correctly adjusted, and avoid excessive feed pressure.
Replace the blade when the teeth become dull or damaged, the blade develops cracks, or cutting quality declines despite proper machine setup and operating conditions.
Check that your machine requires a blade measuring 118.3125 inches long and 3/4 inch wide. Also verify thickness, tooth pitch, and other blade requirements against the machine manual or existing blade.
| Blade Length inches | 118.3125" |
| Min/Max Blade Width | 3/4" to 3/4" |
| Machine Type | Portaband |
| Machine Model Reference | Bauer HS 260 A |
| Machine Type | Horizontal Metal-Cutting Bandsaw |
| Maximum Round Cutting Capacity | Approximately 260 mm |
| Flat / Rectangular Cutting Capacity | Approximately 320 × 240 mm |
| Alternative Capacity Reference | Up to 395 × 220 mm, depending on model/configuration |
| Reference Blade Dimensions | 3,660 × 27 × 0.9 mm |
| Blade Speed | Approximately 20–70 m/min |
| Automatic Operation | Automatic feeder and cutting-length controls, reference configuration |
| Miter Cutting | Angular cutting capability, reference configuration |
| Primary Application | Industrial Metal Cutting |
global ratings
Share your thoughts with other customers