CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Bauer HS 300 A Bandsaw Blade

Bauer HS 300 A Bandsaw Blade
Image not available

HS-300-A

Roll over image to zoom in
HS-300-A
Bauer HS 300 A Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Industrial Metal Cutting

The Bauer HS 300 A bandsaw blade is intended for metal-cutting applications in industrial workshops and manufacturing environments. It is suitable for operations involving metal stock such as bars, pipes, tubes, and structural profiles when the blade specification matches the material and machine requirements.

144.25-Inch Blade Length

With a specified blade length of 144.25 inches, this blade is listed for use with compatible bandsaw setups requiring this measurement. Confirm the machine's exact blade-length requirement before purchasing, as even small dimensional differences can affect installation and tensioning.

1-Inch Blade Width

The blade has a specified width of 1 inch, providing a wide cutting profile for suitable industrial metal-cutting applications. Always verify the required blade width and the machine's guide-arm capacity before installation.

Suitable for Metalworking Applications

This blade is categorized for metal cutting and can be considered for compatible applications involving steel, pipes, tubes, and structural sections. The appropriate tooth pitch and cutting parameters should be selected according to the material type and thickness.

For Compatible Bauer HS 300 A Machines

The blade is listed for the Bauer HS 300 A automatic horizontal metal bandsaw. However, the available machine reference specification lists a blade width of 27 mm (approximately 1.063 inches), rather than the supplied 1-inch width. Verify compatibility with the machine manufacturer or operator manual before ordering.

Supports Industrial Cutting Operations

The Bauer HS 300 A machine is designed for repetitive metal-cutting operations in industrial environments. A correctly matched blade helps operators maintain consistent cutting processes when working with suitable metal stock and following recommended operating procedures.

COMMON QUESTIONS

The specified blade length is 144.25 inches.

The supplied blade specification lists a width of 1 inch.

The Bauer HS 300 A is an automatic horizontal metal-cutting bandsaw designed for industrial cutting operations.

Yes. The blade is categorized for metal-cutting applications and is intended for compatible metal bandsaw machines.

It may be suitable for steel-cutting applications when the blade's tooth pitch, material, and operating parameters are appropriate for the steel section being cut.

Yes, it is intended for compatible metal-cutting applications, including pipes and tubes. Select the correct tooth pitch for the material diameter and wall thickness.

The blade is intended for metalworking applications that may include solid bars. Confirm the blade's tooth configuration and suitability for the size and type of material.

The supplied machine reference information lists a maximum round cutting capacity of up to 300 mm at 90 degrees.

The supplied reference specification lists a maximum flat or rectangular cutting capacity of up to 385 mm × 220 mm at 90 degrees.

The supplied machine specifications list an infinitely variable blade speed range of 20–70 meters per minute.

The supplied technical information lists a main drive power of 1.5 kW.

Yes. The HS 300 A is identified as an automatic model, intended for repetitive cutting operations with automated functions.

The supplied reference information describes automatic material feeding and hydraulic clamping as features of the machine. Confirm the exact configuration of your machine before relying on these features.

Compatibility needs verification. The supplied blade specification is 1 inch wide, whereas the machine reference lists a 27 mm blade width (approximately 1.063 inches). Check the machine manual or manufacturer guidance before ordering.

Confirm the required blade length, width, thickness, tooth pitch, and blade construction from the machine manual or existing blade. Also verify that the replacement blade is suitable for the metal materials and cutting conditions involved.

SPECIFICATIONS

Blade Length inches144.25"
Min/Max Blade Width1" to 1"
Machine TypeMetal
Machine ModelBauer HS 300 A
ManufacturerBauer Saws (Bauer Maschinenbau), Germany
Machine TypeAutomatic Horizontal Metal Bandsaw
Reference Blade Dimensions3660 mm × 27 mm × 0.9 mm
Reference Blade LengthApproximately 144.09"
Reference Blade WidthApproximately 1.063"
Reference Blade Thickness0.035"
Cutting Capacity (90° Round)Up to 300 mm
Cutting Capacity (90° Flat/Rectangular)Up to 385 mm × 220 mm
Blade Speed20–70 m/min
Main Drive Power1.5 kW
Power Supply400V, 3-phase (standard reference specification)
Cutting ApplicationIndustrial Metal Cutting

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available