Designed for Metal Cutting
The Bauer S 160 bandsaw blade is intended for metal-cutting applications, including workshop fabrication, manufacturing, and industrial processing. It can be used for cutting compatible metal stock such as bars, pipes, tubes, and profiles when the blade specifications are appropriate for the material.
118.3125-Inch Blade Length
Featuring a blade length of 118.3125 inches, this bandsaw blade is specified for machines requiring this particular blade measurement. Confirm the blade length against your machine's specifications or existing blade before replacement to ensure correct installation and tensioning.
3/4-Inch Blade Width
The blade comes with a specified width of 3/4 inch, making it suitable for compatible metal-cutting bandsaw configurations. Proper blade width selection is important for blade guidance, stability, and achieving consistent cutting results.
Suitable for Horizontal Bandsaw Applications
The Bauer S 160 is referenced as a horizontal bandsaw model. This blade is intended for compatible horizontal metal-cutting setups used for processing metal stock in workshop and industrial environments.
Versatile Metalworking Applications
The blade can be used for a variety of metal-cutting tasks, including cutting suitable solid bars, tubing, pipes, and structural materials. Selecting the correct tooth pitch and cutting speed according to the workpiece dimensions helps improve cutting efficiency and blade life.
Replacement Blade for Compatible Bauer Machines
This blade is listed with specifications associated with the Bauer S 160 bandsaw. Before ordering, check the machine type plate and existing blade measurements to confirm the required length, width, and thickness, as machine variants may have different specifications.
Supports Consistent Workshop Cutting
A properly matched bandsaw blade helps maintain consistent cutting performance across repetitive metalworking tasks. Correct blade tension, suitable cutting speed, appropriate feed pressure, and regular maintenance are important for reliable operation.
The specified blade length is 118.3125 inches.
The blade has a specified width of 3/4 inch.
The Bauer S 160 is referenced as a horizontal metal-cutting bandsaw model.
Yes, this blade is categorized for metal-cutting applications and is intended for use with compatible metal bandsaw machines.
It may be suitable for cutting steel when the tooth pitch, blade specification, and operating parameters are appropriate for the material dimensions and grade.
Yes, it can be used for compatible metal pipe and tube cutting applications, provided the blade tooth configuration is suitable for the material and wall thickness.
The blade is intended for metalworking applications that may include solid bar cutting. Ensure the tooth pitch is appropriate for the cross-section of the material.
Available blade-size references identify the Bauer S-160 as a horizontal bandsaw model. Verify your exact machine variant before ordering a replacement blade.
The specified minimum blade width is 3/4 inch.
The specified maximum blade width is 3/4 inch.
It is categorized for metal cutting and may be used for compatible steel, metal tubing, pipes, and structural profiles, depending on the blade tooth pitch and cutting conditions.
Check the blade length, width, thickness, tooth pitch, blade direction, tension, and compatibility with the machine's guide system.
Detailed factory specifications for the Bauer S 160 are limited in publicly available references. Check the machine's type plate, manual, or manufacturer documentation for exact operating specifications.
The exact blade-speed range and speed-control configuration have not been verified for this model. Refer to the machine manual or type plate for accurate information.
Use the correct blade tooth pitch for the material, maintain proper blade tension, select suitable cutting speeds, avoid excessive feed pressure, and keep the blade and coolant system in good working condition where applicable.
| Blade Length inches | 118.3125" |
| Min/Max Blade Width | 3/4" to 3/4" |
| Machine Type | Metal |
| Machine Orientation | Horizontal (reference) |
| Machine Model | Bauer S 160 / S-160 |
| Manufacturer | Bauer Maschinenbau, Germany (manufacturer reference) |
| Machine Type | Horizontal Metal Bandsaw (reference) |
| Reference Blade Width | 3/4" |
| Coolant System | Verify machine configuration |
| Cutting Application | Metal Cutting |
global ratings
Share your thoughts with other customers