CUSTOM WELDED BLADES
100% SATISFACTION GUARANTEE
SAME-DAY SHIPPING BEFORE 3PM CST

Bauer S 260 Bandsaw Blade

Bauer S 260 Bandsaw Blade
Image not available

S-260

Roll over image to zoom in
S-260
Bauer S 260 Bandsaw Blade
View Spec

MAIN FEATURES

Designed for Industrial Metal Cutting

The Bauer S 260 bandsaw blade is designed for metal-cutting operations in workshops, fabrication facilities, and industrial environments. It is suitable for processing compatible metal materials, including bars, pipes, tubes, and structural sections, when the blade specifications match the cutting requirements.

144.25-Inch Blade Length

With a specified blade length of 144.25 inches, this blade is intended for bandsaw machines requiring this particular length. Correct blade length is essential for proper installation, tensioning, and smooth operation. Always verify the required dimensions against the machine manual or existing blade.

1-Inch Blade Width

The blade features a specified width of 1 inch, making it suitable for compatible metal-cutting bandsaw setups. Choosing the correct blade width helps maintain proper blade guidance and cutting stability during metalworking operations.

Suitable for Horizontal Bandsaw Applications

The Bauer S 260 is a horizontal metal-cutting bandsaw model designed for processing a range of metal stock. This blade is intended for compatible horizontal bandsaw configurations used in fabrication, manufacturing, and industrial cutting environments.

Supports Straight and Miter Cutting Applications

The Bauer S 260 machine is designed for straight and angled metal cuts, including miter cutting up to 45 degrees on applicable configurations. Using the appropriate blade for the material and machine setup helps achieve consistent results across different cutting applications.

Versatile Metalworking Performance

This blade is intended for cutting suitable metal materials such as steel, pipes, tubing, and structural profiles. Selecting the appropriate tooth pitch, cutting speed, and feed rate for the workpiece can help improve cutting efficiency and blade service life.

Replacement Blade for Compatible Bauer S 260 Machines

This blade is listed for the Bauer S 260 bandsaw with a length of 144.25 inches and a width of 1 inch. However, reference machine specifications commonly list a blade width of 25 mm, approximately 0.984 inches. Verify the exact blade dimensions required by your machine before ordering.

COMMON QUESTIONS

The specified blade length is 144.25 inches.

The supplied blade specification lists a width of 1 inch.

The Bauer S 260 is a horizontal metal-cutting bandsaw designed for industrial metalworking applications.

Yes, this blade is categorized for metal-cutting applications and is intended for use with compatible metal bandsaw machines.

It may be suitable for steel-cutting applications when the blade tooth pitch, cutting speed, and feed parameters are appropriate for the material being cut.

Yes, it can be used for compatible metal pipe and tube cutting applications. Tooth pitch selection should be based on the pipe diameter and wall thickness.

The blade is intended for metalworking applications that may include solid bar cutting. Ensure the tooth pitch is appropriate for the material cross-section and cutting conditions.

Typical reference specifications list a round cutting capacity of up to 260 mm and a flat or rectangular cutting capacity of up to 450 × 240 mm. Exact capacities may vary by machine configuration.

Yes, the Bauer S 260 is designed to support angled or miter cutting, with reference configurations allowing cuts up to 45 degrees.

Typical reference configurations list stepped blade speeds of approximately 20, 35, 50, and 70 meters per minute. Confirm the speed settings on your specific machine.

Reference specifications commonly indicate a motor power of approximately 0.75–0.8 kW, depending on the machine configuration.

Reference configurations may include a coolant system to help reduce heat and friction during metal cutting. Check the installed machine configuration.

Compatibility should be verified. Some Bauer S 260 reference specifications list a blade width of 25 mm (approximately 0.984 inches), which is slightly narrower than the supplied 1-inch blade specification.

Confirm the required blade length, width, thickness, tooth pitch, machine variant, and blade-guide compatibility. Check the existing blade or machine manual before placing an order.

Use the correct tooth pitch and cutting speed for the material, maintain proper blade tension, avoid excessive feed pressure, and follow recommended coolant and blade-maintenance practices.

SPECIFICATIONS

Blade Length inches144.25"
Min/Max Blade Width1" to 1"
Machine TypeMetal
ApplicationMetal Cutting
ManufacturerBauer Maschinenbau, Germany
Machine TypeHorizontal Metal Bandsaw
Reference Blade Dimensions3660 × 25 × 0.9 mm
Reference Blade LengthApproximately 144.09"
Reference Blade Width25 mm (approximately 0.984")
Reference Blade Thickness0.9 mm
Cutting Capacity (90° Round)Up to 260 mm
Cutting ApplicationIndustrial Metal Cutting

Customer reviews

0 out of 5

global ratings

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Review this product

Share your thoughts with other customers

No reviews available