Designed for Metal Cutting
The Bauer S 300 bandsaw blade is intended for metal-cutting applications in industrial workshops, fabrication facilities, and manufacturing environments. It is suitable for cutting compatible metal materials, including steel bars, pipes, tubes, and structural profiles, when the blade specification matches the workpiece and machine requirements.
144.25-Inch Blade Length
With a specified blade length of 144.25 inches, this blade is designed for bandsaw machines requiring this particular measurement. Proper blade length is essential for correct installation, tensioning, and smooth operation. Always check your machine specifications before replacing the blade.
1-Inch Blade Width
The blade features a specified width of 1 inch, making it suitable for compatible metal-cutting bandsaw configurations. Selecting the correct blade width helps maintain proper blade guidance, stability, and cutting accuracy during metalworking operations.
Suitable for Horizontal Bandsaw Machines
The Bauer S 300 is a horizontal metal-cutting bandsaw designed for industrial cutting applications. This blade is intended for compatible horizontal bandsaw setups used for processing metal stock in workshops and manufacturing facilities.
Versatile Metalworking Applications
This blade is suitable for a range of compatible metal-cutting applications, including solid bars, pipes, tubing, and structural sections. Selecting the appropriate tooth pitch and cutting parameters according to the material type and dimensions can help achieve consistent cutting results.
Supports Straight and Miter Cutting
The Bauer S 300 machine is designed to handle straight cuts and angled cutting applications, with reference configurations supporting miter cuts up to 45 degrees. The correct blade selection and machine setup help maintain cutting consistency when working with different material profiles.
Replacement Blade for Compatible Bauer S 300 Machines
This blade is listed for the Bauer S 300 bandsaw with a specified length of 144.25 inches and a width of 1 inch. Some machine references list blade widths of 25 mm or 27 mm, so verify your exact machine configuration and blade dimensions before ordering.
The supplied blade specification lists a length of 144.25 inches.
The specified blade width is 1 inch.
The Bauer S 300 is a horizontal metal-cutting bandsaw designed for industrial metalworking applications.
Yes, this blade is categorized for metal-cutting applications and is intended for compatible metal bandsaw machines.
It may be suitable for steel cutting when the blade tooth pitch, cutting speed, and feed rate are appropriate for the material's dimensions and grade.
Yes, it can be used for compatible pipe and tube cutting applications. Tooth pitch should be selected according to the pipe diameter and wall thickness.
The blade is intended for metalworking applications that may include solid bar cutting. Ensure that the tooth pitch is appropriate for the workpiece cross-section.
Reference specifications list a round cutting capacity of up to 300 mm, depending on the machine configuration.
Reference machine specifications list a rectangular cutting capacity of approximately 395 × 240 mm. Confirm the exact capacity of your machine variant.
Yes, reference configurations support miter cutting up to 45 degrees, depending on the machine setup.
Typical reference specifications list blade speeds of 20, 35, 50, and 70 meters per minute.
Reference specifications list motor power at approximately 0.75 kW. Specifications may vary by machine variant.
Tooth pitch depends on the type of metal, material thickness, and workpiece cross-section. Thinner materials generally require finer tooth pitches, while thicker sections need tooth pitches that maintain adequate tooth engagement.
Not necessarily. References list different blade widths, including 25 mm and 27 mm. Check the existing blade, machine manual, and blade-guide dimensions before ordering.
Use the correct tooth pitch and cutting speed for the material, maintain proper blade tension, avoid excessive feed pressure, and follow recommended coolant and maintenance procedures.
| Blade Length inches | 144.25" |
| Min/Max Blade Width | 1" to 1" |
| Machine Type | Metal |
| Machine Orientation | Horizontal |
| Machine Model | Bauer S 300 / S 300 |
| Manufacturer | Bauer Maschinenbau, Germany |
| Machine Type | Horizontal Metal Bandsaw |
| Reference Blade Length | 3660 mm (approximately 144.09") |
| Reference Blade Width | 25 mm or 27 mm, depending on listing |
| Reference Blade Thickness | 0.9 mm |
| Round Cutting Capacity | Up to 300 mm |
| Rectangular Cutting Capacity | Approximately 395 × 240 mm |
| Miter Cutting Angle | Up to 45° (reference configuration) |
| Blade Speeds | 20 / 35 / 50 / 70 m/min |
| Motor Power | Approximately 0.75 kW |
| Cutting Application | Industrial Metal Cutting |
global ratings
Share your thoughts with other customers