Cosen SH-260-C Compatibility
The Cosen SH-260-C Bandsaw Blade is specified for compatible Cosen SH-260-C horizontal metal-cutting bandsaws. Always confirm the complete blade dimensions and tooth configuration against your machine before ordering.
144-Inch Blade Length
The supplied product specification lists a 144-inch blade length. Correct blade length is critical for proper wheel installation, tracking, tensioning, and reliable machine operation.
1-Inch Blade Width
This blade has a listed width of 1 inch, with both the minimum and maximum blade width specified as 1 inch. The blade width should be matched carefully to the machine's guide and wheel configuration.
Heavy-Duty Metal Cutting
The blade is designed for demanding metal-cutting environments. With an appropriate tooth pitch and blade construction, it can be matched to steel, structural profiles, tubing, bar stock, and other compatible industrial metals.
Horizontal Scissor-Style Application
The associated SH-260-C platform uses a horizontal scissor-style saw frame. This configuration provides a practical solution for medium-capacity metal cutting and production-oriented fabrication work.
260 mm Cutting Capacity
The referenced Cosen 260 mm machine category provides cutting capacity of approximately 260 mm (10.2 inches) for round and square material, with rectangular capacity reaching approximately 260 x 300 mm on referenced configurations.
Variable Blade Speed
The machine platform uses an inverter-controlled blade drive with a referenced speed range of approximately 50–328 FPM. Adjustable speed allows operators to select suitable cutting conditions for different metals.
Dual-Valve Feed Control
Independent adjustment of blade feed rate and feed pressure helps operators optimize cutting performance. Proper feed control can reduce excessive tooth loading and help extend blade life.
Rigid Blade Guidance
Tungsten carbide blade guides combined with roller bearings provide additional blade support. Correct guide adjustment helps minimize vibration and blade deflection during cutting.
Hydraulic Blade Tensioning
The associated Cosen platform can use automatic hydraulic blade tensioning. Maintaining the correct tension helps stabilize the blade and support straight, consistent cuts.
Blade Breakage Protection
A blade safety shutdown system can stop the machine when blade breakage is detected. This helps prevent continued operation after a blade failure.
Hydraulic Split-Jaw Vise
The heavy-duty cast-iron hydraulic vise uses a split-jaw configuration to securely clamp workpieces. Effective clamping helps reduce movement and vibration during cutting.
Powered Blade Brush
A synchronized motor-driven wire brush helps remove chips from the blade gullets during operation. Keeping the tooth gullets clear can support efficient chip evacuation and consistent cutting.
Heavy-Duty Gearbox
The machine platform incorporates a rugged gearbox designed to withstand demanding cutting loads. Stable power transmission helps maintain reliable blade movement during production cutting.
Industrial Replacement Blade
This blade is intended as a machine-specific replacement option. Before purchase, verify blade length, width, thickness, tooth pitch, blade material, guide configuration, and machine model for complete compatibility.
