Cosen SH-800-F Compatibility
The Cosen SH-800-F Bandsaw Blade is designed for compatible Cosen SH Series heavy-duty horizontal metal-cutting bandsaws. Always verify the blade dimensions against the machine's existing blade before ordering.
307.25-Inch Blade Length
This blade has a listed length of 307.25 inches, making it suitable for the specified large-format Cosen machine configuration. Correct blade length is essential for proper wheel tracking, installation, and tensioning.
2-Inch Blade Width
The supplied product specification lists a 2-inch blade width. A wide blade profile provides the dimensional specification required for heavy-duty cutting applications, but the exact machine requirement should always be confirmed before purchase.
Heavy-Duty Metal Cutting
The blade is intended for demanding industrial metal-cutting applications. Compatible workpieces may include steel, iron, structural profiles, pipes, large solid stock, and other dense metals when the blade tooth configuration is properly selected.
Dual-Column Machine Application
The Cosen SH Series uses a heavy-duty dual-column or gantry-style structure designed to maintain parallel frame movement. This rigid construction helps distribute cutting forces and reduce blade deflection during large-workpiece cutting.
Large Cutting Capacity
The associated SH heavy-duty platform is designed for large metal workpieces, with the supplied specifications indicating cutting capacity of up to approximately 800 mm or 31.4 inches at 90 degrees.
Variable Blade Speed
The Cosen SH platform uses an inverter-controlled blade drive for variable cutting speeds. Supplied specifications indicate approximately 50 to 288+ FPM, allowing cutting parameters to be adjusted according to material type and blade selection.
Heavy-Duty Blade Support
Enhanced blade guides using carbide components and bearings help support the blade during demanding cuts. Proper guide adjustment is important for minimizing blade deflection and maintaining cut accuracy.
Hydraulic Blade Tensioning
The associated Cosen SH machines can use automatic hydraulic blade tensioning. Proper blade tension helps maintain blade stability during high-load cutting operations.
Blade Breakage Protection
Cosen SH configurations can include a blade breakage sensor designed to stop the machine when a blade failure is detected. This safety feature helps reduce the risk of continued machine operation following blade breakage.
Dual-Valve Feed Control
Independent feed-pressure and feed-rate adjustment allows operators to adapt cutting conditions to different material cross-sections. Correct feed settings can help prevent excessive tooth loading and premature blade wear.
Heavy-Duty Gearbox
The associated Cosen SH platform uses a heavy-duty gearbox designed for demanding cutting loads. Stable power transmission supports consistent blade movement during large-section metal cutting.
Hydraulic Material Clamping
The machine platform incorporates hydraulic vises for securing large workpieces. Proper clamping helps minimize movement and vibration while the blade is engaged with the material.
Powered Chip Brush
A synchronized motor-driven blade brush helps remove metal chips from the blade gullets during cutting. Effective chip removal helps maintain tooth engagement and supports consistent cutting performance.
Industrial Production Application
The Cosen SH series is designed for heavy-duty industrial environments. A correctly matched blade can be used for fabrication, structural steel processing, manufacturing, maintenance, and other high-volume metal-cutting applications.
