• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7-1/4" X 5/8" X 48T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/4" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo blades can be used on a standard circular saws.

Non-Ferrous Metals/Plastics Saw Blade

• Diablo Metal Cutting
• 12" X 1" X 96T
• Ideal For: Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood *Note: Only cut laminate flooring on a 12" slide miter or table saw
• Diablo's blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out.
• Laminated materials are highly abrasive, so these blades feature a TiCo^™ carbide blend ideally suited to harsh service. 
• Diablo's blade is ideal for 12 inch sliding miter saws and portable table saws. 12-inch diameter, 96t TCG, 1-inch arbor, 5 degree hook.

Freud Panel Blade #LU3A0203

• 10" X 5/8" 80T HI ATB
• Application: To size bi-laminated panels, with perfect finish on both sides without use of the scoring saw blade.
• Machines: Vertical saws, panel-sizing machines, portable machines.
• Features: HI ATB 38° tooth, 2deg Hook,100% Laser Cut, Silver I.C.E Coated
• Material: Double-sided panels with extremely fine coatings, veneered panels.

Framing Saw Blade #D0724A

• Framing Saw Blade
• 7-1/4" X 5/8" X 24T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Ideal for general construction applications, including fast, efficient ripping and crosscutting. 
• Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. 
• Requiring less cutting power from the user and overall better control over the cuts. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life

4‑1/2" Flap Disc 60 Grit ‑ Type 29

Diablo's Steel Demon™ flap discs feature a premium zirconium grain blend for up to 10X faster material removal when compared to standard grinding wheels. The flap discs' special flap design offers flexibility and provides for a cushioned grinding effect. Diablo's high performance flap discs combine two steps in one by simultaneously grinding and polishing.

Super Dado Sets #SD508

• 8" Super Dado
• Ideal For: For cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
• To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
• Set includes 2 blades, 6 chippers, shim set and carrying case.
• Adjusts in 1/32" increments.

Ultimate Plywood & Melamine Blade #LU80R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max)
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Description not displayed for Tradeshow Special items

Thin Kerf Fine Finish Crosscut Blade #LU88R010

• 10" X 5/8" X 60T ATB
• Ideal For: Crosscutting Blades For Fine Finish With Underpowered Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Thin Kerf General Purpose Blade #LU86R012

• 12" X 1" X 48T ATB
• Ideal For: For Heavy-Duty General Purpose Applications.
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• For crosscutting thick hardwoods as well as softwoods and thinner stock materials.
• Ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

4‑1/2" Diamond Metal Cut‑Off Blade

Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 5-3/8" X 20MM X 30T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness
• Mild steel only - 1" max diameter 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting
• Enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
• With up to 40X the life of standard abrasive disc
• Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• Diablo's blade is designed to fit Panasonic and Similar Metal Cutting Saws
• 5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7" X 20MM X 48T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo blades are designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws.
• 7-Inch/18mm diameter x 48t, 2mm arbor, 39+ RPM, 1/8-Inch max cut thickness, general purpose steel.

355mm Ferrous Metals Sawblade

355MM x 1" BORE x 72T DTCG CARBIDE TIPPED FOR FERROUS METAL BLADE, 2.6 KERF

For cutting ferrous metals, mild steel, copper and etc. WARNING: This blade is not suitable for cutting non-ferrous metals (aluminum), wood, glass and conglomerate.

Thick Non-Ferrous Metal Blade #LU89M010

• 10" X 5/8" X 72T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

 Non-Ferrous Metals & Laminate Saw Blade #D1084L

• 10" X 5/8" X 84T
• Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood
• Note: Only cut laminate flooring on a 10" slide miter or table saw
• Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. 
• Diablo's blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

Finish Saw Blade #D0740A

• Finish Saw Blade
• 7-1/4" X 5/8" X 40T
• Ideal For: High quality crosscuts and rip cuts in wood, plywood & melamine
• This Finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. 
• A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
• The perfect choice for excellent rips and crosscuts using a portable saw.
• They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. 

10 in. x 90 Tooth Ultimate Polished Finish Saw Blade

Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.