Aftermarket Doall Band Saw Parts

P Doall 002984

Internal Retaining Ring - Doall 002984
Ref: Mfg. Part Number 2.813
Ref: Mfg. Product Code 8D1032

Quality Aftermarket Replacement Part for Doall Band Saw Internal Retaining Ring or Piston Ring for pinion housing. Internal Retaining Ring - Doall 002984 Ref: Mfg Part Number 2.813 Ref: Mfg Product Code 8D1032 Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers. All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Width
System	Drive Line Parts
Model	Marvel #8
System	Wheel & Pinion Assembly

^$8.⁸⁴

P Doall 090-109836

2 Pack, Wire Chip Brush
Ref: Mfg Part Number 3" DIA
Aftermarket Doall Part

Quality Aftermarket Replacement Part for DoAll Band Saw

2 Pack, Wire Chip Brush
Ref: Mfg Part Number 3" DIA

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Chip Brushes, 2 Pack

OD: 3", Arbor ID: 1/2", Thickness: ⅝"

OD: 76mm, Arbor ID: 13MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet

Teeth breaking off

Teeth cracking

Blade cracking from teeth up

Loss of tooth set

Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.

All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
ID	½"
OD	3"
Thickness	⅝"
Blade Width	All Blade Width
System	Chip Brush

^$45.⁵⁷

P Doall 11529

Backup Bearing
10X30X9
Parts, Aftermarket, Amada

Doall Band Saw Replacement Parts

Product Details
photo below
Blade Width	All Blade Widths
System	Blade Guides
Blade Width	All Blade Width
System	Bearing

^$12.⁹⁷

P Doall-TQ-20

Product Image for 20" x 1-1/2" Urethane Band Wheel Tire Stretch On Urethane Band saw Tire

20" x 1-1/2" Urethane Band Wheel Tire
Stretch On Urethane Band saw Tire
Fits Machines with 20" Wheel Diameter

Urethane Tires last longer and work far better than rubber tires.They will not wear out and become brittle as quickly as rubber tires do. You will absolutely see the difference in the performance of your band saw when you upgrade to Urethane Tire.

Product Details
photo below
Material	Urethane
Tire Diameter	20"
Tire Width	1-1/2"
Thickness	.090"
Blade Width	All Blade Width
System	Band Saw Tires

^$35.⁹⁶

P Doall-TP-20

Product Image for 20" x 1-5/8" Rubber Band Wheel Tire Secure Fit Rubber Band Wheel Tire

20" x 1-5/8" Rubber Band Wheel Tire
Secure Fit Rubber Band Wheel Tire
Fits Machines with 19"-20" Wheel Diameter

A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.

Product Details
photo below
Material	Rubber
Tire Diameter	20"
Tire Width	1-5/8"
Blade Width	All Blade Width
System	Band Saw Tires

^$30.³⁶

P Doall-TP-26

Product Image for 26" x 2" Rubber Band Wheel Tire Secure Fit Rubber Band Wheel Tire

26" x 2" Rubber Band Wheel Tire
Secure Fit Rubber Band Wheel Tire
Fits Machines with 24"-26" Wheel Diameter

A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.

Product Details
photo below
Material	Rubber
Tire Diameter	26"
Tire Width	2"
Blade Width	All Blade Width
System	Band Saw Tires

^$38.³⁶

P Doall-TP-36

Product Image for 36" x 2-1/8" Rubber Band Wheel Tire Secure Fit Rubber Band Wheel Tire

36" x 2-1/8" Rubber Band Wheel Tire
Secure Fit Rubber Band Wheel Tire
Fits Machines with 35"-36" Wheel Diameter

A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.

Product Details
photo below
Material	Rubber
Tire Diameter	36"
Tire Width	2-1/8"
Blade Width	All Blade Width
System	Band Saw Tires

^$51.⁹⁶

P Doall 21944

Helical Bull Gear - DoAll 21944

Parts, Aftermarket, DoAll

Quality Aftermarket Replacement Part for Doall Band Saw

Replaces old part number 090-219445. Bull Gear for the transmission. Fits horizontal saw models C-69,C-70,C-80 & C-1216. _x000D_

Helical Bull Gear - Doall 21944
Parts, Aftermarket, Doall
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Width
System	Drive Line Parts

^$296.⁶⁶

P Doall 102662

Helical Pinion Gear - DoAll 102662

Parts, Aftermarket, DoAll

Quality Aftermarket Replacement Part for Doall Band Saw

Replaces old part number 091-026625. Pinion Gear for the transmission. Fits horizontal saw models C-69,C-70,C-80 & C-1216. _x000D_

Helical Pinion Gear - Doall 102662
Parts, Aftermarket, Doall
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Width
System	Drive Line Parts

^$287.⁵⁸

P DOALL GAKIT 125 H

DoAll 1.25 Horz Bandsaw Upgrade Set of 4 Guides
For 1 1/4" Bandsaw Blade
Mfg #'s 143271,143272, 143273, 143274

DoAll Carbide Blade Side Guides

Carbide Insert Side Guide Set for DoAll Horizontal Band Saws using a 1.250", 1-1/4", 34mm Wide Blade

Replaces Bandsaw Carbide Guides Numbers:

Manufacturer Part Number	Alternate Part Number
143271	NC1.25D
143272
143273
143274

This Set of 4 Side Guides fits DoAll Horizontal Saws using a 1 ¼" (34mm) blade and replaces sawguides 143271, 143272, 143273, 143274, and NC1.25D

Upgrade your DoAll band saw with this Black Iron band saw guide kit for improved precision and performance. This kit includes four high-quality side guides featuring carbide insert guides that fit seamlessly on DoAll band saws with a 1.250" wide blade. Compatible models include C-3300, C-260, C-1720, C410, C-4100, C-1213A, C-1216A, C3300NC, and C-4100NC.

Application

Upgrade your DoAll sawguides with this Black Iron Band Saw Guide Kit for improved precision and performance.
Includes four high-quality side guides that fit seamlessly on machines with a 1-1/4" (34mm) wide blade.
Made for various DoAll saw models calling for the listed part numbers.

Features

High-quality construction with carbide insert selection guides ensures durability and long-lasting performance.
Precision-engineered guides reduce blade deflection and improve cutting stability.
Seamless integration with DoAll band saws for easy installation and immediate use.

Benefits

Enhances cutting accuracy and precision, reducing material waste, and improving productivity.
Increases blade stability and minimizes friction for smoother, quieter operation.
Extends the life of band saw blades with bandsaw carbide guides, reducing overall maintenance costs and downtime.

Product Details
photo below
Blade Width	1.00" Blade
Blade Width	1.25 Blade
Guide Type	Side Guide, Carbide
Machine Mfg	DoAll
Machine Mfg	DoAll
Machine Size	Carbide Blade Guides - 1 ¼"
System	Blade Guides
Blade Width	1.25 Blade
Machine Mfg	DoAll

^$452.²⁵

P DOALL 091-156331

Bearing
Transmission Bearing
Aftermarket Doall Part

Bearing

Product Details
photo below
Blade Width	All Blade Width
System	Bearing

^$27.⁹⁰

P Doall 106074

Limit Switch

Parts, Aftermarket, Doall

Quality Aftermarket Replacement Part for Doall Band Saw

Limit Switch
Parts, Aftermarket, Doall
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Width
System	Electrical Parts

^$172.^{68 **}

P DOALL 115633

Bearing
Transmission Bearing
Aftermarket Doall Part

Bearing

Product Details
photo below
Blade Width	All Blade Width
System	Bearing

^$20.⁹³

P DOALL GAKIT 100 H

DoAll 1.00 Horz Bandsaw Upgrade Set of 4 Guides
For 1" Bandsaw Blade
Mfg #'s 137155, 137156, 137157, 137158

DoAll Carbide Blade Side Guides

Carbide Insert Side Guide Set for DoAll Horizontal Band Saws using a 1", 27mm Wide Blade

Replaces Bandsaw Carbide Guides Numbers:

Manufacturer Part Number	Alternate Part Number
137155	NC1.00D
137156
137157
137158
091-4327-4
091-4327-16
091-4327-40
091-4327-32

This Set of 4 Side Guides fits DoAll Horizontal Saws using a 1" (27mm) blade and replaces sawguides 137155, 137156, 137157, 137158, 091-4327-4, 091-4327-16, 091-4327-40, 091-4327-32, and NC1.00D

Upgrade your DoAll band saw with this Black Iron band saw guide kit for improved precision and performance. This kit includes four high-quality side guides featuring carbide insert guides that fit seamlessly on DoAll band saws with a 1" wide blade. Compatible models include C-58, C-70, C-206A, C-305A, C-916A, and C-80.