Aftermarket Hydmech Band Saw Parts

P HYD 370215

Cable
Sold By The Inch
Quality Aftermarket Bandsaw Part

Quality Aftermarket Hydmech Part

Cable
P HYD 370215
Sold by the Inch

Product Details
photo below
Blade Width	2.625" Blade
Coolant	none
System	Electrical

^$0.^{25 **}

Q Fluids C5300-5 HYD

C-5300 Full Synthetic Coolant, 5 Gallon
Metal Cutting fluid
5 Gallon Container

Applications

Specially formulated flood sawing fluid for moderate - heavy duty applications on ferrous metals and alloys when you need to paint or weld over the surfaces
A translucent blue, water soluable, full synthetic sawing fluid designed when long life of the coolant is desired.
Metals: Carbon steels, Alloy steels, Cast iron, High alloys steels, Stainless steels and exotic alloys

Features

Enviromentally Friendly: Is easy to maintain and control.
Low Foaming: Even under high agitation conditions
Excellent Corrosion Control: Organic and inorganic corrosion inhibitiors protect machinery and parts from rust.
Rancidity Control: Very resistant to attack by mold and bacteria
Exceptionally Mild: A great choice for individual saw applications
Operator and Machine Friendly: Pleasant to use. Does not smoke or leave a slippery, oily film on parts or machinery. Stable and transparent.
Formulated Specifically for Sawing and Grinding
Lubricates and cools extending tool life
Surfaces can be welded and painted over
Improves life and maintenance of machine wear parts
Does not contain chlorine, sulfur, silicon, petroleum oils or sulfonates
Long sump life-Biodegradable
Surfaces can be welded and painted over

Dilution

1:7 for sawing applications
1:10 for grinding uses

Product Details
photo below
Container Volume	5 Gallon
Fluid Type	Synthetic
Blade Width	All Blade Widths
System	Coolant System
Reference

^$195.^{14 **}

Q Fluids C5200-5 HYD

C-5200 Semi-Synthetic Coolant, 5 Gallon
Metal Cutting Fluid for All Hydmech Saws
5 Gallon Container

Applications

General purpose flood sawing coolant designed for moderate-duty - heavy duty sawing applications involving both ferrous and non-ferrous metals
A translucent blue, water soluable, synthetic sawing fluid designed when long life of the coolant is desired.
Metals: Carbon steels, Alloy steels, Cast iron, High alloys steels, Stainless steels and exotic alloys

Features

Enviromentally Friendly: Is easy to maintain and control.
Low Foaming: Even under high agitation conditions
Excellent Corrosion Control: Organic and inorganic corrosion inhibitiors protect machinery and parts from rust.
Rancidity Control: Very resistant to attack by mold and bacteria
Exceptionally Mild: A great choice for individual saw applications
Operator and Machine Friendly: Pleasant to use. Does not smoke or leave a slippery, oily film on parts or machinery. Stable and transparent.
Formulated Specifically for Sawing and Grinding
Lubricates and cools extending tool life
Enhanced lubrication for improved tool penetration
Improves life and maintenance of machine wear parts
Does not contain chlorine, sulfur, silicon, petroleum oils or sulfonates
Long sump life-Biodegradable

Dilution

1:7 for sawing applications
1:10 for grinding uses

Product Details
photo below
Container Volume	5 Gallon
Fluid Type	Semi-Synthetic
Blade Width	All Blade Widths
System	Coolant System
Reference

^$232.^{11 **}

P HYD 342340

2 Pack Chip brush for Hydmech saws
OD: 4", Arbor ID: 1/2",
OD: 102mm, Arbor ID: 13MM

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Brushes, 2 Pack

OD: 4", Arbor ID: 1/2", Thickness: 5/8"

OD: 102mm, Arbor ID: 13MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet

Teeth breaking off

Teeth cracking

Blade cracking from teeth up

Loss of tooth set

Product Details
photo below
Blade Width	All Blade Widths
System	Chip Brushes
ID	½"
OD	4"
Thickness	⅝"

^$37.²⁰

P HYD 342315

2 Pack Blade Brush for Hydmech Saws
OD: 3 3/8", Arbor ID: 1/2"
OD: 85mm, Arbor ID: 13MM

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Brushes - 2 Pak

2 Pack, Band Saw Blade Chip Brush

OD: 85mm, Arbor ID: 13MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet

Teeth breaking off

Teeth cracking

Blade cracking from teeth up

Loss of tooth set

Product Details
photo below
Blade Width	All Blade Widths
System	Chip Brushes
ID	½"
OD	3 ⅜"
Thickness	⅝"

^$20.⁴⁶

P HYD 340345

Drive Belt For Hydmech Saws
Vari-Speed Belt
Aftermarket Hydmech Part

Drive Belt for Hydmech Band Saws

Variable Speed Belt used most Hydmech machines This is a Common Wear Item you should have an Extra on hand

P Hyd 340345 - Belt Drive 28 / 800

Product Details
photo below
Blade Width	All Blade Widths
System	Drive Line

^$131.¹³

P HYD 340976

Charcoal Foam Filter
Filter 30 PPI Charcoal Foam
Quality Aftermarket HydMech Bandsaw Part

Quality Aftermarket Replacement Part for HydMech Band Saw

Charcoal Foam Filter
Filter 30 PPI Charcoal Foam
3 7/8 In. X 5 3/4 In. X 1.00
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines.
We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Widths
Coolant	Coolant System
System	Coolant System
Reference

^$10.¹⁸

P HYD GAKIT 800721-800723

1 ¼" Carbide Side Guides For Hydmech Saws
Set of 4 guides
MFG# 800721, 800723

Hydmech Band Saw Guides Part No P Hyd Gakit 800721-800723

Black Iron Replacement Band Saw Guides for Hydmech Saws with 1 ¼” Blade

This Carbide Side Guides set fits various Hydmech Saws including but not limited to:

Hydmech 1 ¼” Older Machines

Guide Kit Includes Mfg Part Numbers
CRB-125-22-00	CRB-125-21-00	800721	800723

Product Details
Type Of Guide	Carbide Side Guides
Blade Size	1 ¼”
Sold as	Set of 4 Guides
Compatibility	This Side Guide Set fits Hydmech Saws with a 1.250" Wide Blade and uses the listed cross numbers. Backup Guides needed are Part Number P HYD GAKIT BU 340790
Mounting Hardware Includes	NO
Material	Carbide On Steel Backing
Delivery	Ships in 1 Day

Black Iron Hydmech Bandsaw Guide Kit

These guides are direct replacements eliminating any guesswork during installation. Black Iron Carbide Side Guides are designed to enhance your Hydmech 1 ¼” Machine's performance and precision. Engineered with cutting-edge technology, You can expect durability, accuracy, and longevity from Black Iron Guides, making them an essential upgrade for your Hydmech band saw.

Application

Upgrade your Hydmech band saw with the Black Iron precision carbide upgrade kit, replacing the existing guides.
Use on Hydmech Saws that have a 1 ¼” Band Saw Blade
Guides are essential for straight cuts and blade life

Features

100% direct replacement
High-quality carbide side guides provide exceptional wear resistance and are designed for long life
Precisely engineered guides reduce blade deflection and improve stability for smoother, more accurate cuts

Benefits

Enhances cutting accuracy and precision for improved productivity and reduced material waste.
Increases blade stability and minimizes friction, resulting in quieter operation and smoother cuts.
Extends blade life

Product Details
photo below
Blade Width	1.25 Blade
Blade Width	1.25" Blade
Guide Type	Side Guide, Carbide
Machine Mfg	Hydmech
Machine Mfg	Hydmech
Machine Size	Carbide Blade Guides - 1 ¼"
System	Blade Guide
Machines Designed for	1 ¼" Hydmech Machines
Blade Size	1 ¼"
Blade Width	1.25 Blade
Machine Mfg	Hydmech

^$400.⁰⁰

P HYD 025.0552

Band Brush

Aftermarket Hydmech Parts

Aftermarket Hydmech Parts

P HYD 025.0552

Band Brush

P HYD 025.0552 was also used on S20 series 3 machines, as well as DM8 and DM10 machines.

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Chip Brushes

^$41.³⁶

P HYD 806830

Chip Brush Assembly, Hydmech Saws
Chip Brush Assembly for the S & H Series
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saws

Chip Brush Assembly for the S & H series of bandsaws.

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Chip Brushes
Blade Width	All Blade Widths
System	Chip Brushes

^$234.³⁶

P HYD GAKIT 800717

1" Carbide Side Guides For Hydmech Saws
Set of 4 Guides
Mfg# 800717

Hydmech Band Saw Guides Part No P Hyd Gakit 800717