Item added to cart
OD: 3, ID: 3/8", Thickness: 5/8"
OD: 76mm, Arbor: 9MM, Thickness: 16mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | ⅜" |
| OD | 3" |
| Thickness | ⅝" |
 |
|
OD: 3, ID: 3/8", Thickness: 5/8"
OD: 76mm, Arbor: 9MM, Thickness: 16mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | ⅜" |
| OD | 3" |
| Thickness | ⅝" |
|
|
Product Details |
|
|---|---|
| photo below | |
| Blade Width | .75" Blade |
| System | Feed System |
 |
|
Product Details |
|
|---|---|
| photo below | |
| Blade Width | .75" Blade |
| System | Feed System |
|
|
Blade Guide
Product Details |
|
|---|---|
| photo below | |
| Blade Width | 1.00" Blade |
| System | Blade Guides |
 |
|
Blade Guide
Product Details |
|
|---|---|
| photo below | |
| Blade Width | 1.00" Blade |
| System | Blade Guides |
|
|
A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.
Product Details |
|
|---|---|
| photo below | |
| Material | Rubber |
| Tire Diameter | 10" |
| Tire Width | 3/4" |
| Blade Width | All Blade Width |
| System | Band Saw Tires |
 |
|
OD: 2", ID: 15/64", Thickness: 1/2"
OD: 50mm, Arbor: 6MM, Thickness: 12mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | 15/64" |
| OD | 2" |
| Thickness | ½" |
 |
|
OD: 2", ID: 15/64", Thickness: 1/2"
OD: 50mm, Arbor: 6MM, Thickness: 12mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | 15/64" |
| OD | 2" |
| Thickness | ½" |
|
|
This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump
Circulation of Coolant
Enclose immersion pump designed for long life under tough conditions.
Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.
Product Details |
|
|---|---|
| photo below | |
| Blade Width | 1.00" Blade |
| System | Coolant System |
 |
|
This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump
Circulation of Coolant
Enclose immersion pump designed for long life under tough conditions.
Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.
Product Details |
|
|---|---|
| photo below | |
| Blade Width | All Blade Width |
| System | Coolant System |
|
|
This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump
Circulation of Coolant
Enclose immersion pump designed for long life under tough conditions.
Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.
Product Details |
|
|---|---|
| photo below | |
|
OD: 2", ID: 15/64", Thickness: 1/2"
OD: 50mm, Arbor: 6MM, Thickness: 12mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | 15/64" |
| OD | 2" |
| Thickness | ½" |
|
|
Cylinder Valve
Product Details |
|
|---|---|
| photo below | |
| Blade Width | .75" Blade |
| System | Feed System |
 |
|
Product Details |
|
|---|---|
| photo below | |
| Material | Rubber |
| Tire Diameter | 18" |
| Tire Width | 1-1/2" |
| Blade Width | All Blade Width |
| System | Band Saw Tires |
 |
|
OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"
OD: 38mm Shaft: 6MM Shaft Length :27mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| Blade Width | All Blade Width |
| System | Chip Brush |
| ID | 15/64" Shaft |
| OD | 1 ½" |
| Thickness | 5/16" |
 |
|
OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"
OD: 38mm Shaft: 6MM Shaft Length :27mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| ID | 15/64" Shaft |
| OD | 1 ½" |
| Thickness | 5/16" |
|
|
OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"
OD: 38mm Shaft: 6MM Shaft Length :27mm
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
Product Details |
|
|---|---|
| photo below | |
| Blade Width | All Blade Width |
| System | Chip Brush |
| ID | 15/64" Shaft |
| OD | 1 ½" |
| Thickness | 5/16" |
|
|
Urethane Tires last longer and work far better than rubber tires.They will not wear out and become brittle as quickly as rubber tires do. You will absolutely see the difference in the performance of your band saw when you upgrade to Urethane Tire.
Product Details |
|
|---|---|
| photo below | |
| Material | Urethane |
| Tire Diameter | 20" |
| Tire Width | 1-1/2" |
| Thickness | .090" |
| Blade Width | All Blade Width |
| System | Band Saw Tires |
 |
|
Blade Guide Assm. Left Side
Product Details |
|
|---|---|
| photo below | |
| Blade Width | .75 Blade |
| Blade Width | .75" Blade |
| Guide Type | Side Guide, Roller |
| Machine Mfg | Jet |
| System | Blade Guides |
 |
|
Aftermarket replacement Jet Band Saw Parts Lower price, Better Quality. We innovate the manufacturing process on Jet Band Saw Replacement Parts by using robotic processes, This delivers a better part, faster.
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
