Rikon Power Tools

HSS 2-Edge Inserts for 25-130H Planer 10 PK

• For use with 20-600H, 20-800H, 25-131H, 25-130H
• 2-Sided Indexible HSS inserts change easily – 14.2mm x 14.2mm x 2mm (2 Sided)
• Pack of 10 HSS inserts
• HSS inserts change easily

Carbide 2-Edge Inserts for 25-130H Planer 10 PK

Carbide 2-Edge Inserts for 25-130H, 25-131H Planers & 20-600H, 20-800H Jointer 10 PK

• For use with 20-600H, 20-800H, 25-131H, 25-130H
• 2-Sided Indexible Carbide inserts change easily – 14.2mm x 14.2mm x 2mm (2 Sided)
• Pack of 10 Carbide inserts
• Carbide inserts change easily

Carbide 4-Edge Helical Cutter Inserts for Stationary Planer, Planer/Jointers Pack 10

• Replacement carbide 4-edge insert cutters for RIKON planers and planer/jointers over 15″ – 15mm x 15mm x 2.5mm
• Pack of 10 carbide inserts
• 4-Sided Indexible carbide inserts change easily
• Index mark on the insert top makes locating sharp edges easy when setting

Carbide Insert Cutters Pack 10 - 4-sided 14x14x2mm (20-106H, 108H, 23-150H)

• Replacement carbide 4-edge insert cutters for RIKON 23-150H – 14mm x 14mm x 2mm
• Pack of 10 carbide inserts
• 4-Sided Indexible carbide inserts change easily
• Index mark on the insert top makes locating sharp edges easy when setting

Mobility Kit for 25-210(H) Planer/Jointer

• For use with 25-210, 25-210H
• It allows you to safely and easily move your equipment around your shop
• That type of mobility is essential for those of us who have a shop where space is limited
• This mobility kit includes tow bar, wheels, and the necessary hardware needed to mount it to your planer/jointer

Mobile Base for 25-010 (H) Planer/Jointer

• For use with 25-010, 25-010H
• Mobile base for planer/jointer
• Fits with 10 inches planer/jointer
• Enhance the versatility of the space saving 25-010 planer/jointer combo by adding a mobility kit

Morticing Attachment w/Chisels fits RIKON 13", 17", 20", 34" Drill Presses except 30-236, 30-217

• The Mortising Attachment Kit can be installed on most any drill press quills or quill collars with a size of: 40mm, 48mm, 50.8mm, 55mm, 60mm, 66mm or 75mm diameter
• The chisel is held in the yoke by its 5/8” diameter shank
• When in use, the square chisel will cut into the wood, forcing the cut material inwards
• Kit includes yoke, collar adapters, fence, hold downs, 4 chisels & bits (1/4”, 5/16”, 3/8” 1/2”) and plastic storage case

3/8"Mortice Chisel/Bit

• Machined steel chisels have 5/8” shanks
• Precision machined square outside surfaces
• Drill bits that turn inside of the chisels have brad points
• Both chisel and bits require final sharpening before use

5/16"Mortice Chisel/Bit (Longer)

• Machined steel chisels have 5/8” shanks
• Precision machined square outside surfaces
• Drill bits that turn inside of the chisels have brad points
• Both chisel and bits require final sharpening before use

8" Benchtop Drill Press

• 5 Spindle Speeds
• Solid Steel and Cast Iron Construction
• Depth Stop
• Cast Iron Table

8” Benchtop Drill Press #30-100 is a small size machine that is popular with craftspeople and hobbyists that do not need a lot of power or capacity when drilling small holes in their projects. The small overall size and weight is also perfect for storage and transporting.

13" Benchtop Bench Drill Press

• For use with 10-324, 10-324TG, 13-325 and 13-326 (both sold separately)
• Base Plate Adapter along with a Mobility Kit allow you to safely move your 10-324 around the shop
• The use of a Mobility Kit is essential for shops with limited space
• Sturdy welded design supports the weight of a 10-324
• All mounting hardware included

Baseplate Adapter 13-324 allows the use of Mobility Kit 13-325 & 13-326 (sold separately). The baseplate is bolted under the legs of the 10-324 14″ Standard Bandsaw giving the saw a sturdy platform to operate safely with the RIKON Mobility Kit. No need to cut plywood or measure a universal mobile base to fit your 10-324 & 10-324TG!

34" Benchtop Radial Drill Press

• Powerful 1/3 HP Motor
• 5 Spindle Speeds
• Clutch Depth Stop
• Cast Iron Table

34” Benchtop Radial Drill Press #30-140 provides great versatility for drilling of projects that are not so large as to require a floor model. This space-saving, portable size machine has proven to be quite valuable for solving unusual drilling needs on the jobsite – from drilling balustrades for stair railings, to timber framing hole & peg construction.

12" VS Drill Press with digital readout and laser

• Powerful 3/4 HP Motor
• Variable Speeds
• LED Light & Laser X-Y Guides
• LED Digital Display

12” Variable Speed Benchtop Drill Press #30-212VS features a more powerful motor and a Vari-speed pulley system that adjusts to chuck speeds with a simple turning of a lever! Includes digital RPM readout, LED work light, laser X-Y drilling guide, clamp-friendly thin edge woodworking table and a 5/8” chuck.

17" Floor Model Drill Press

• Horsepower 1 HP TEFC
• Amps, Watts 13.5, 750W
• Volts 120V, 60Hz
• RPM 1,720
• Swing 17”
• Chuck Size 5/8”
• Chuck Taper JT3
• Drilling Capacity 1”
• Spindle Travel 3-1/8”
• Spindle Taper MT2
• Head Rotates 360°
• Speeds 16
• Speed Range (RPM) 200 – 3,630
• Quill Diameter 66mm

• Table Size 14” x 14”
• Table Tilts 90°
• Table Rotates 360°
• Maximum Chuck to Table 25-1/4”
• Maximum Chuck to Base 44-13/16”
• Column Diameter 80mm

• Height 64-3/8”
• Base Size 17-1/2” x 22-1/2”
• Net Weight 188 lbs.
• Shipping Weight 198 lbs.
• Shipping Carton 55” x 21” x 9-1/2”
• Warranty 5 Years

34" Floor Model Radial Drill Press

• Powerful 1/3 HP Motor
• 5 Spindle Speeds
• Clutch Depth Stop
• Cast Iron Table (Round)

34” Floor Radial Drill Press #30-251 has the same great features as the bench model, but has larger components in proportion with the added height and capacities of this floor model – larger base, column, and tableassemblies. The work table on this model is round shape, and will turn 360° as well as tilt 45° in left and right.

Drill Chuck and Arbor with MT2 Taper

Drill Chuck and Arbor with MT2 Taper

• Great for turning small parts
• 5/8-Inch Maximum opening
• Solid steel construction
• Fits all MT2 Taper spindles and tailstocks

12v Li Drill/Impact Driver Combo Kit

Model 31-122 comes complete with Drill featuring a 3/8″ keyless chuck, 1/4″ Impact Driver two batteries and charger.

Model 31-120 3/8″ Cordless Drill: Strong 12V motor powered by a long lasting 2.0Ah 12V Lithium Ion battery. Two speed all metal gear box produces 0-350 RPM on low range and 0-1,350 RPM on high range. Drill produces 204 in-lbs of torque. 

Model 31-121 1/4″ Impact Driver: Incredible strength producing 885 in-lbs of torque along with a long lasting 2.0Ah 12V Lithium Ion battery give you the ability to drive screws and fasteners effortlessly. Both Drill and Impact Driver have three-stage LED battery level indicators, variable speed switches with FWD/REV function. They also include LED work lights and comfortable rubber grips on ergonomically designed handles to dampen vibration. Includes carrying case.

31-120 – 3/8” Cordless Drill

• 3/8” Keyless Chuck
• 18 Torque Settings +1 Drill Setting
• Two Speed Ranges: 0-350/0-1,350RPM
• Variable Speed Motor
• FWD/REV Function
• 3 Stage LED Battery Level Indicators
• All Metal Gearing
• Ergonomically Designed Handles
• Comfortable Rubber Grips
• LED Work Light

31-121 – 1/4” Impact Driver

• 1/4” Quick Release Hex Shank Chuck
• 0-500 RPM Variable Speed Motor
• Produces 885 in-lbs of Torque
• Impacts Per Second: 3000IPS
• FWD/REV Function
• 3 Stage LED Battery Level Indicators
• All Metal Gearing
• Ergonomically Designed Handles
• Comfortable Rubber Grips
• LED Work Light

12v Li 2.0 Battey for 31-122

• 12V 2.0 Ah Lithium Ion Battery

12v Charger